P-Series chillers are available in air-cooled, water-cooled and split systems in sizes from 1 to 50 tons, and special models up to hundreds of tons. These process chillers can be configured with internal or external tanks and pumping systems, and can be installed both indoors and outdoors. Air-cooled condensers are constructed with seamless copper tubing and the fins are mechanically bonded with aluminum. These condensers have aluminum fans and totally enclosed air over (TEAO) fan motors that are designed to prevent overload.

FC Series cooling towers are designed for outdoor use in industrial manufacturing. Each tower’s 100% nonferrous construction provides corrosion resistance for a long service life and requires low maintenance. The tower casing and basin are made of fiberglass, and the internal structural supports are made from reinforced fiberglass. The fan support and fasteners are constructed from Type 304 stainless steel. Large, non-clogging orifice nozzles distribute water efficiently and uniformly across the entire fill surface.

Designed to operate at temperatures up to 280°C, Atlas dry baths offer a safer and more efficient heating option for round-bottom flasks or vials without the risk and mess of oil baths. Compatible with leading brands of hotplates, the stacking dry bath is both compact and flexible. Its series of concentric cups accommodates flasks of varying volume, from 50 mL to 1 L. The triple dry bath is available for three flasks with capacities ranging from 50 mL to 250 mL. A protective safety shield enables the module to be quickly picked up and moved in the case of an emergency.

The FireSight high-temperature remote viewing system permits continuous and safe viewing of the flame quality and impingement on the tube walls of petrochemical process heaters. The system allows operators to view the flame in real time in order to tune the furnace to eliminate impingement, a hazardous and potentially catastrophic condition. It also provides an economical means to speed light-off and reduce NOx emissions by permitting color video monitoring of combustion and process control in boilers, furnaces, kilns and incinerators.

INFI-SEAL technology provides improved heater reliability and eliminates moisture-related startup problems by transforming the magnesium oxide in a tubular heater’s cold section from hygroscopic to hydrophobic (from readily absorbing water to repelling water). These treated heating elements exhibit infinite resistance to ground and do not absorb or retain moisture and are backed with a two-year limited warranty against moisture penetration.

The custom Gaumer Hot Oil System (GHOS) series is used in heating revolving rolls, platens, molds, jacketed tanks, and autoclaves. It has a pre-engineered design package that has been field tested under continuous operation at temperatures up to 650°F. Low watt-density Incoloy 800 sheath-heating elements are arranged to provide an even distribution of heat inside the tube bundle. The unique “buffer tank” design solves oil degradation problems associated with hot oil (over 150°F) reaching the expansion tank without the need for a nitrogen purge system.

The No. 960 gas-heated, 550°F tunnel oven is used for processing various composite resins and fibers. The modulating gas burner is powered by 400,000 BTU/h, while a 12,500-ft3/min, 10-hp recirculating blower provides vertical downward airflow to the load. The oven features 4-in. insulated walls throughout, an aluminized interior and exterior, a motor-operated vertical lift door, side doors for workload access/maintenance and integral guide tracks at the workspace entry to support the user’s wheeled loading fixture, for faster start-up of the process.

Harper International will exhibit its advanced thermal processing technology to the advanced material processing and chemical industry. The firm provides customized thermal processing systems that require precise atmosphere controls and ultra-high temperatures. Harper provides research and development, pilot plant, full production and complete post sales support. The company’s technology center provides process development to optimize scaleup.

The BDHR series of boiler-blowdown heat-recovery systems are pre-engineered modules that include a plate heat-exchanger or optional shell-and-tube heat exchanger, pressure-relief valve, isolation valve and mechanical or electrical level controls. They recover up to 95% of the heat energy normally lost with conventional continuous blowdown separators. The resulting flash steam can be used to preheat boiler makeup water to heat the feedwater or the deaerator tank, or other fuel-saving uses. Modules are available in eight sizes of centrifugal blowdown vessels ranging from 8 in.

These vaporizers are designed for use in process industries such as chemical, petrochemical, textile, and others requiring large amounts of accurately controlled heat at high temperatures and low operating pressures. Recirculating fluids such as Dowtherm A, Dowtherm J and Therminol VP-1 can be maintained at temperatures as high as 750°F. Utilizing the vapor phase of these heat-transfer fluids promotes high heat-transfer rates and also close temperature control. Other liquids that can be vaporized include ammonia and liquefied gases.