Designed for semiconductor manufacturing, testing and handling applications, the new 6-axis robot family includes the KUKA KR 3 CR tabletop robot with a 3-kg payload and a 635-mm reach and the KUKA KR 16 CR robot with a 16-kg payload and a 1,600-mm reach. Each model meets the appropriate ISO and DIN standards for cleanroom operation and is class 5 according to DIN EN ISO 14644-1 and class 100 according to U.S. Federal Standard 209 E. The robots can be integrated with Siemens Simatic Equipment Control System.

VIBXPERT, a lightweight, 2-channel, FFT data collector/vibration analyzer, is designed to monitor and diagnose machine conditions. Equipped with an expandable compact flash card, it records all forms of machine vibrations, bearing conditions, process data and visual inspection information. VIBXPERT provides comprehensive analysis functionality for the diagnosis of complex vibration problems, with an easy-to-use icondriven platform. It can measure order spectrum, phase, cepstrum, cross-channel phase, orbits, run-up and coastdown.

The V-Cone Chem Processing flowmeter supports a wide range of both chemical production process line and general plant applications, including measuring water, other mixed liquids or specialty gas flows within process lines, as well as plant systems for water/wastewater, chilled water, steam, natural gas and HVAC. It features an advanced differential-pressure flow sensor designed with built-in flow conditioning to achieve an accuracy of ±0.5%, with a repeatability of ±0.1. The device operates over a flow range of 10:1, and comes in line sizes from 0.5 to 120 in.

The WLSX level transmitter allows continuous non-contact ultrasonic level measurement in liquid storage tanks up to 35 ft (10.7 m). It is ideally suited for challenging corrosive, coating or waste liquids. The compact, corrosion-proof package is completely sealed and stands only 3 in. (76 mm) above the top of the tank. The sensors are two-wire transmitters that are UL, CSA and CE approved. The WLSX can be installed and calibrated in minutes using a calibration wire and a flashing LED that provides calibration feedback.

The waterMONITOR level transducer now comes in a rugged all-titanium package. The submersible hydrostatic transducer, which includes internal datalogging functionality, is ideal for measuring water levels in environmental management applications, such as ground water, surface water, and open-channel level measurement, as well as down hole, well, lake, stream and reservoir level monitoring, and watershed management.

The modular Viscotek Model 350 HTGPC is a high-temperature (150°F) gel-permeation chromatography (GPC) system that features automated sample preparation and delivery, self-cleaning inline sample filtration and a detector module that is easily removed for routine maintenance. The unit can be configured with a refractive index (RI) detector and low angle/right angle laser light scatttering (LALS/RALS) detector to provide absolute molecular weight, molecular size and other critical information.

The Enpac Ex data collector utilizes the latest advances in analog and digital electronics, including digital signal processing (DSP) and a powerful Sigma-Delta A/D converter to provide both speed and accuracy in the data collection process. It was specifically designed to meet ATEX Zone 0, a European Union category designation for areas where an explosive atmosphere is continuously present or present for long periods.

OxyTrak is an innovative sealed reference analyzer that uses a unique, miniaturized zirconium-oxide sensor with a sealed internal reference to accurately determine flue gas oxygen content, even with rapidly changing process conditions. With the sensor acting in “pump” mode, the current needed to maintain partial pressure equilibrium is proportional to the oxygen content. In addition, the Nernst voltage present during transients is used to instantly indicate the magnitude of oxygen content changes.

The customizable SEL-3351 system computing platform is designed to replace office-grade PCs in control house environments. It has a variety of configuration options, including protocol conversion, Human-Machine Interface (HMI), event report retrieval, Sequential Events Recorder (SER) reporting, automatic control, software logic, self-diagnostics, system configuration, and data concentration. The firm has also released the SEL-3301 Protocol Gateway, which provides reliable protocol conversion to connect older and newer equipment.

Designed for measuring dry bulk solids, regardless of the presence of surrounding vapor or moderate dust, the EasyTrak XP laser transmitter is housed in an explosionproof assembly with screw-on cover for quick and easy access. The dual-compartment design allows users to isolate the wiring and terminations from the sensing elements and internal electronics. Meeting the requirements for use in hazardous areas (FM and CSA — Class I, Division 1 and 2, Groups A, B, C, D), the EasyTrak XP’s rugged, powdercoated aluminum enclosure is rated for IP67 or NEMA 4X and DIP ratings.