Resflex Series resin-bonded filter cartridges use a two-stage design to provide reliable, effective filtration. Their outer spiral prefilter wrap efficiently removes large particles and agglomerates, provides increased surface area, and intensifies cartridge strength, while eliminating residual debris common with conventional, machined resin-bonded cartridges. The filters’ inner layers provide superior smaller-particle removal. Units handle flowrates of 10 gal/min for each 10 in. of cartridge length.

Pillow Block Model 163 is a rugged, easy-to-install bearing assembly designed to operate under high- or low-load conditions in moderate-speed applications. This heavy-duty unit is available in cast iron or stainless steel, with optional cast-iron split-angle housing. It is suitable for use in high-temperature applications, such as ovens, drag-line conveyors and dampers. It also performs well in wet applications, such as washdowns, and in submerged applications, such as plating tanks and industrial washers.

The Model 700-TH-5-SS inline rotary mixer gently blends batches as large as 5.0 ft3 (142 L) with complete uniformity down to the 1-ppm level in under 3 min, and it is efficient across its entire usable capacity range of 0.25–5.0 ft3 (7.1–142 L). (Its standard weight capacity is 500 lb (226 kg) per batch.) The mixer is capable of evacuating the batch and leaving no residuals, and it can be sanitized rapidly without tools. It features a stationary inlet and outlet for inline operation, and a rotating drum with proprietary mixing flights that tumble, turn and fold material gently.

The GT multi-pump dispensing system performs spill-free, environmentally safe transfer of virtually any chemical or liquid. It is designed to expand existing process capabilities and streamline operations involving multiple liquids. The dispensing system permits simultaneous multiple liquid-transfer stations using GoatThroat pumps to operate from a single shop line with only 2–4 psi. Because they pose no sparking hazard, the air-operated pumps are suitable for environments where electric pumps cannot be used.

The Kenics KMX static mixer has a patent-pending, ASME-certified design that generates superior mixing per unit length for laminar flow and high/low viscosity ratio applications. Its internal elements feature concave blade construction, which creates strong cross-stream mixing and flow splitting to achieve rapid blending. Sheets of low-viscosity additives are driven along the trough of each blade and abruptly sheared by strong cross-stream velocity gradients as they pass around the upstream surface. The mixer requires no external power or regular maintenance.

An optional 2-in. Type 316 stainless steel bulkhead fitting allows Series HGL mixers to be integrated with standard intermediate bulk containers or poly tote bins. These mixers, which operate at rates up to 430 rev/min, feature a short shaft and a folding propeller, also constructed of Type 316 stainless steel, that can fit through a 2-in. opening. The propeller’s operating diameter is 9 in., and a second folding propeller can be added as an accessory and bolted anywhere on the 0.75-in.-dia. shaft.

Specifically designed to achieve the purity requirements of the food, beverage and pharmaceutical industries, CLEARGAF filter bags are FDA-compliant as per the 21CFR177 standard, and EC-compliant as per the 90/128/EEC standard. They are manufactured under special conditions to ensure they contain no contamination. Single packaging in protective plastic keeps bags free from contamination during shipping, storage and installation, and special warehousing facilities provide protection during storage.

The IS-971 floor-model shaker series consists of three models, each of which can hold up to four 6-L flasks. An assortment of platforms and clamps allows the shakers to handle flasks, beakers, separatory funnels and micro-plates. The IS-971 has a temperature range of 5ºC above room temperature to 60ºC. The IS-971R and the IS-971RF have temperature ranges from 4ºC above room temperature to 60ºC, with a temperature uniformity of ±1.0ºC at 38ºC. Motion can be orbital or reciprocating, and the speed can range from 10 to 300 cycles per minute with a maximum orbit diameter of 70 mm.

The 2000 Model G2 pump features the crown gear-type universal joint, which is a heavy-duty drive train configuration. The pump is capable of accommodating exceptionally high torsional and thrust loads and can handle fluid viscosities up to 1,000,000 cP unassisted. The patented joint seals effectively protect gear joints from pumpage contamination. The pump offers flowrates to 400 gal/min and pressure capabilities to 350 psi. Additional product features include: superior abrasion resistance, low shear, varying hopper sizes, and high volumetric and mechanical efficiencies.

Designed for viscous products up to 500,000 cP, these 400-gal polyethylene non-pressure piston bins are closed-loop systems that protect materials from air, moisture, dirt and other contaminants. Ideal for FDA materials, such as mayonnaise and molasses, the bins are also used for transporting products for pharmaceutical manufacturers, wineries and breweries. Rugged and durable, the bins have fork-lift pockets to make for easy transport, and are reusable and returnable. The bins use a pump-operated system that fills and discharges through a single 3-in. bottom valve.