The Maxiline MBF HD multi-bag filter housing is designed for cost-sensitive, high-flowrate liquid filtration applications up to 4,500 gal/min. The unit features a rugged, hand-wheel-operated davit cover that provides dependable service in most demanding industrial applications. Filter media changeout is simple — remove the cover, loosen the cover eye bolts, turn the hand wheel to raise the cover, and swing it aside; no overhead cranes or external lifting gear are required.

The Type VRS circular vibratory screening machine is suitable for fractionating, protective and control screening, and de-dusting, as well as the wet screening and dewatering of a variety of bulk solids. Instead of conventional tensioning belts, the machine features a clamping screw design that offers quick access to the screen inserts, provides for a more stable machine behavior and facilitates assembly characteristics. Robust rubber elements on the mounting frame support the Type VRS and achieve a performance that is virtually vibration free.

Designed for applications where non-contact between products is crucial, this conveyor achieves zero-pressure accumulation that stages from the discharge end around virtually any degree of curvature. The conveyor utilizes PosiGrip technology, which has roller-drive gear teeth formed directly into the rollers, and is powered by smooth, quiet synchronous belting in a positive drive. The latter provides superior drive force vs. line-shaft and O-ring styles of conveyors, while eliminating metal-to-metal contact.

An alternative to expensive cartridge filters, the economical PROGAF filter bags combine extended service life with filtration efficiency ratings of up to 99.98%. Their unique multi-layer construction provides a progressive filtration mechanism that traps unwanted particles throughout the depth of the media. The filter bags’ 100% polypropylene construction provides the benefits of a chemically resistant and silicone-free material used to manufacture an economical, self-contained and easy-to-dispose filter bag.

The Powderflight aeromechanical conveyor can handle anything from chalk to lead shot. However, it is most efficient when handling fine powder or granules. The conveyors can handle a wide variety of materials, with minimal product degradation and no separation of blended solids. Typical applications include filling silos or tankers, batching various products into a mixer, feeding reactor vessels, or transferring solids from mixers or reactor vessels to bulk bags.

 Available in both single and double lengths, the SaniClean inline sanitary strainers provide cost effective filtration. Designed for maximum application flexibility, the housing accepts a wide range of reusable strainer elements — wire mesh OverScreens, SKS OverScreens, and Slotted Screens.  Disposable filter socks are also available. SaniClean side-inlet strainers are also available in both single and double lengths. They use the same wire mesh OverScreens and filter socks as the inline units. The strainer’s inlet is located on the side of the housing.

The DPG-B Series gravity-loaded bottom-discharge dense-phase conveyors are ideal for moving powdered, granular, or pelletized friable and abrasive materials. They are rated up to 100+ ton/h and provide high material-to-air ratios and extremely low line velocities, resulting in smaller line sizes, lower air consumption, reduced dust collection, and lower capital investment and operating costs. Abrasive wear and particle degradation are also minimized. Programmable controls (PLCs) offer reduced supervision for automated operation.

The 250 Series center-drive line of conveyors combine a unique center drive and very low profile (1.89 in.), allowing them to be used in tight quarters where conventional conveyors will not fit. With a load carrying capacity of 630 lb and speeds up to 360 ft/min, the 250 Series conveyors are ideal for many material handling applications. Belt widths ranging from 2 in. to 24 in. are available in lengths from 4 ft to 28 ft. A snap-in sealed tail assembly allows belts to be changed in less than 5 min using standard hand tools.

The compact E-Z Tec 9100 is a highly sensitive device designed for installation in free-fall or gravity-fed applications, especially where vertical space is limited. The unit detects and rejects very small ferrous, non-ferrous and stainless steel metals. To allow greater quality control, the E-Z Tec 9100 is capable of inspecting both virgin and regrind plastic pellets to ensure all are free from metal contamination. It protects all types of molding machinery, granulators, shredders and other important equipment from costly damage.

Designed for laboratory scaleup testing, the fully integrated NIR System incorporates near-infrared (NIR) spectroscopy with 21CFR Part 11-compliant software to provide immediate and reliable data that are remotely transferred to a personal computer. The combination of a robust vibration-resistant design, moderate bin rotation speeds and easy-to-use software ensures 100% accurate scaleup results. Effective bin-blending volumes range from 20% to 85%. The system is fully enclosed and eliminates physical sampling requirements.