ChemE On Demand

AIChE's ChemE on Demand is a multi-media digital library containing hundreds of on-demand webinars and recorded conference presentations. This convenient resource is designed to meet your needs as a chemical engineer. AIChE professional members are entitled to 6 FREE 'credits', good for content in ChemE on Demand each year. Undergraduate student members get free unlimited access to ALL ChemE On Demand content.

Interested in Proposing a Webinar? Learn More | Product Bundles offer the best value. Learn More

Featured

Overpressure Protection Webinar Bundle

Purchase this bundle on Overpressure Protection and learn about explosion protection and the principle of flammability of vapor/air mixtures. Also learn about pressure relief valves and gas/liquid fluids in pipe flow.

Objectives of Anti-Surge Control

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Objectives of Anti-Surge Control Preventing a compressor surge is the primary purpose of an anti-surge controller. However, there are additional...

Investigation of the Adsorbed Species of CO2 on Mg(OH)2

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Introduction Fossil fuels supply a majority of the world's energy needs. However, the combustion of fossil fuels is one of the major sources of the...

Trip & Throttle Valve Reliability

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Trip & Throttle Valve Reliability Trip & Throttle (or Stop) valves are used in ethylene plants to isolate the energy to steam turbines when...

Process Automation During Refinery Unit Transitions

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Process Automation ideas and technologies have been used sporadically for decades. However, in US refineries, automation technologies are still...

What to Do When Nothing Has Happened?

Global Congress on Process Safety
Mar 15, 2011
Often during a Layer of Protection Analysis (LOPA) or a Quantitative Risk Analysis (QRA) study, historical information indicates no occurrences of a...

Ethylene Boil-off Compressor Process Safety Incident

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Braskem, a Brazilian player among petrochemical manufacturers, produces monomers, resins and chemicals specialties. The overall Ethylene capacity is...

Mitigation of Preheat Fouling by Eliminating the Cause

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Today, there is no excuse for not getting five years or more on the run length of refinery preheat exchangers without the need for cleaning. Among...

An Update on OSHA's PSM National Emphasis Programs

Global Congress on Process Safety
Mar 15, 2011
Since 2007, OSHA has initiated two major National Emphasis Programs (NEPs) in process safety. The Petroleum Refinery Process Safety Management NEP (...

Thoughts about Safety, Staying at Zero

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Perfect safety records and perfect environmental records are an “inalienable right”, given to us not by governments, companies, or others. It is a...

LNG Tank Top Fires

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
The regulatory requirements of 49 CFR 193, Liquefied Natural Gas Facilities: Federal Safety Standards, require thorough engineering reviews before...

Acid Release From Catalyst Tanks

Global Congress on Process Safety
Mar 15, 2011
This is the story of how the cumulative effects of several seemingly innocent changes to a catalyst system resulted in a near miss Process Safety...

Flare Minimization Via Dynamic Simulation

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Flaring in chemical process industry (CPI) is an important method to protect equipment and personnel safety during the process upset and the chemical...

Novel Additives to Improve Resid Quality

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
With an increasing focus on resid upgrade and bottom of the barrel conversion over the years due to economic advantages, refiners are increasingly...

C5 Metathesis for Increased Propylene Production

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
The production of on-purpose propylene via the metathesis of ethylene and butenes now exceed 6% of the total propylene. The supply of butenes is...

Role of Plasma Chemistry In Fuel Reforming Process

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
The purpose of the present study is to investigate role of plasma chemistry in a fuel reforming process. So far, role of plasma chemistry in a fuel...

Glid ARC Plasma Conversion of Pyrolysis Gas Into Syngas

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
Pyrolysis gas is a product of Biomass, Municipal Wastes or Coal gasification process that contains H2, CO as well as unreacted light hydrocarbons and...

Multi-Model MPC for a Complex pH Neutralization Process

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
Control of feed pH control is an important task in chemical industries, wastewater treatment, polymerization reactions, fatty acid production and...

Inherent Safety In Front End Engineering

Global Congress on Process Safety
Mar 14, 2011
The best time to apply the principles of inherent safety is during the early stages of a design. In particular it is at the early stages that the ?...

Implementation of PSM In Capital Projects

Global Congress on Process Safety
Mar 14, 2011
It is critical to embed Process Safety Management in the capital project system to help achieve a safe start-up. This is the foundation for assuring...

Prevention of CUI: “ Roadmap to Managing CUI ”

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
This paper details CUI cases as well as the means for preventing, finding and repairing them. Approaches and procedures for managing CUI are...

Industry Standards for Composite Repair Systems

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
ABSTRACT A significant amount of work has transpired over the past several years in generating consensus-based standards that include ASME PCC-2 and...