The Sentinel I-24 leak tester uses proprietary algorithms and a 32-bit processor to enhance its speed, repeatability and accuracy. The device performs automatic calibration to ensure accurate results, and the manufacturer’s Quik tests to analyze results, all in real time. With an interface that includes up to five programmable tool controls, the Sentinel I-24 is capable of flexible multi-testing. It features easily expandable USB data storage, an enhanced operating system, flexible communication formats (e.g., Ethernet, USB port or RS232), and automatic setup for easy programming.

Clarity RP and RX rear-projection displays are designed for demanding control room applications. The units are available in both 50-in. and 67-in. sizes, with an option of either an open or integrated system. These displays feature the manufacturer’s Set It and Forget It (SiFi) technology, which reduces the time and expertise needed to optimally balance a video wall. The RP series is geared specifically for data-rich applications, such as running supervisory control and data acquisition (SCADA) software or high-resolution satellite imagery/mapping.

The Asset Command Unit (ACU) is a wireless tracking device that uses a global positioning system (GPS) to monitor and report on a railcar’s location and other metrics, including shock and vibration, temperature of contents, open/closed hatch status, and loaded/empty status. This rugged telemetry device is mounted on the railcar or locomotive and features a microprocessor, a GPS receiver, and a digital cellular modem. The power for the unit is provided by a lithium-ion battery, maintained by an integrated solar panel.

The LM 40 is a mobile laboratory-scale blender that has an NIR spectrometer integrated into the lid of the blending bin, specially adapted 21 CFR Part 11-compliant software. The NIR system is housed with the light source in a single stainless steel box that rotates with the bin. Continuous 24 V DC power through slip-ring technology eliminates batteries. Data are transferred using wire cables instead of radio signals to eliminate possible interference. The blender is integrated into a frame with lock casters.

This in-line viscosity and temperature-control system features an isolated temperature sensor and a proprietary cooling device (patent pending), which eliminates the need to clean the line and apparatus, saving both time and solvent. Capable of providing

Micro Motion Elite Coriolis meters are now offered with a nickel-alloy C-22 construction option and a high-pressure option. Model CMF400 is suitable for 4-in. to 6-in. line sizes with a maximum flowrate to 20,000 lb/m. The high-pressure CMF400P version is now pressure-rated to 2,973 psi, making it suitable for ethylene, natural gas, refining and petrochemical applications where accurate and reliable measurements, taken under high-pressure conditions, are critical.

The 3100 Series Pressure Transducers deliver accuracy and long-term stability, with a full-scale accuracy of 0.25% and long-term drift of just 0.1%/yr over the full scale. This combination of performance and stability is achieved using sputtered thin-film sensing technology, yet is available at prices more common to lower-quality capacitance sensors. At less than 1-in. in diameter and just 32 g, these compact transducers are suitable for installation where space is at a premium. Built from stainless steel, they are well-suited to harsh environments.

The Dynacalibrator Model 150 is a constant-temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations. This lightweight, compact unit is capable of delivering the precise concentrations required.

The Positek E111 is an intrinsically safe, rugged, linear position sensor for use in potentially explosive dust and gas/vapor atmospheres, including areas with continuous, long or frequent periods of exposure to hazardous gas and dust. With no wearing contacts, the E111 has virtually an infinite life, is highly linear and repeatable, and maintains output stability over a wide temperature range of –40°F to 176°F. The sensor’s body and target rod are made of stainless steel for long service life and corrosion resistance.

The MiniConsole is a low-height, one-size-fits-anywhere console system for situations where process visibility is essential to production. Its compact design provides a clear line-of-sight of the process, and features an ergonomically angled display and keyboard for a standing operator’s comfort. The MiniConsole is optimal for multi-plant deployment projects where site surveys are impractical. It mounts to a short post that can be installed directly onto the plant floor.