Environmental Progress & Sustainable Energy, November/December 2019, Volume 38, Issue 6

Browse Issue

Issue Information - Cover and Table of Contents
A Comparison of Thermal and Mechanical Properties of Clay Bricks Prepared with Three Different Pore - Forming Additives: Vermiculite, Wood Ash, and Sawdust
Detailed performance model of carbon dioxide absorption utilizing titanium dioxide nanoparticles in a wetted wall column
Relationship analysis of anaerobic fermentation parameters exposed to elevated chromium (VI)
Transcriptome Differential Analysis of Chlorella sp. Cultivated with Simulated Flue Gases
Effects of infiltrator structure and hydraulic loading rates on pollutant removal efficiency and microbial community in a modified two - stage constructed rapid infiltration systems treating swine wastewater
Thermal analysis of parabolic trough concentration photovoltaic/thermal system for using in buildings
Influence of Functionalized Carbon Nanotubes on Catalytic Activity of V2O5/TiO2 - CNTs for 1, 2 - Dichlorobenzene Oxidation
Applicability of various adsorption isotherm models on adsorption of methane and CO2 on Indian shales
Pomegranate peels as versatile adsorbents for water purification: Application of box - behnken design as a methodological optimization approach
GHGs emission and mitigation burden for power plants in western china considering N2O and SO2 removal
Agro - economic and ecological assessment of poultry abattoir sludge as bio - nutrient source for walnut plantation in low - fertility soil
Effect of specific height on productivity and thermal efficiency of a solar still: An experimental approach under indoor environment
Plausibility of assessing environmental impacts of a domestic biogas digester in the design stage
Mulching with crop straws influences cadmium accumulation of Cyphomandra betacea seedlings
The Effect of Soil Organic Matter, Electrical Conductivity and Acidity on the Soil's Carbon Sequestration Ability Via Two Species of Tamarisk (Tamarix Spp.)
Study on the stability and green application exploration of waste drilling fluid
Calculation of optimum insulation thickness of external walls in residential buildings by using exergetic life cycle cost assessment method: Case study for Turkey
Evolution toward the utilization of mango leaves as lignocellulosic material in bioethanol production: A review of process parameter and integrated technologies
Structural characterization of shale oil obtained by Soxhlet extraction
Mathematical modeling and sensitivity analysis of xylene removal in a scoria - compost biofilter
Experimental and computational analysis of the collector geometry of a solar chimney
Techno - economic feasibility of building attached photovoltaic systems for the various climatic conditions of Iran
Utilizing SWMM and GIS to identify total suspended solids hotspots to implement green infrastructure in Lucas County, OH
Utilization of cocoa activated carbon for trimethylamine and hydrogen sulfide gas removals in a confined space and its techno - economic analysis and life - cycle analysis
Biogas production from most agricultural organic wastes by anaerobic digestion in Taiwan
Chemical synthesis of materials based on calcium zirconate for solid oxide fuel cells (SOFC)
Synthesis of zeolite/activated carbon composite material for the removal of lead (II) and cadmium (II) ions
A panel co - integration analysis for economic development, energy consumption, urbanization, and carbon dioxide emissions in China's six provinces
Measurement and estimation of densities of different biodiesel - diesel - alcohol ternary blends
Synthesis of MoO3/polypyrrole nanocomposite and its adsorptive properties toward cadmium(II) and nile blue from aqueous solution: Equilibrium isotherm and kinetics modeling
Uncertainty and sensitivity analyses of incinerability index
Facile salt - free process for cotton fabric dyeing: Pad - irradiate - pad - steam process using 3 - chloro - 2 - hydroxypropyl trimethyl ammonium chloride
Efficient adsorption of Cd(II) ions from aqueous media onto a semi - interpenetrating bio - composite
Energy performance and summer thermal comfort of traditional courtyard buildings in a desert climate
Thermal analysis of north wall insulated greenhouse dryer at different bed conditions operating under natural convection mode
Comparison of the adsorption of H2S by ZnO - TiO2 and Ni - ZnO - TiO2 nanoparticles: An adsorption isotherm and thermodynamic study
Effective degradation of doxycycline by photocatalytic BiVO4 - H2O2 under visible light
Modeling and optimization of chromium adsorption onto clay using response surface methodology, artificial neural network, and equilibrium isotherm models
Mercury removal from water using deep eutectic solvents - functionalized multi walled carbon nanotubes: Nonlinear autoregressive network with an exogenous input neural network approach
Ruthenium oxide/tungsten oxide composite nanofibers as anode catalysts for the green energy generation of Chlorella vulgaris mediated biophotovoltaic cells
Capture of CO2 by highly concentrated alkanolamine solutions in a rotating packed bed
Simulation process of biodiesel production plant
Heavy metals inhalation exposure analysis from particulate matter emitted from dry and wet recycling processes of waste electrical and electronic equipment
Influence of torrefaction after densification on the fuel characteristics and the inherited gasification kinetics of Erianthus arundinaceus energy grass
Floating solar power plant for sustainable development: A techno - economic analysis
Performance, emission, energy, and exergy analysis of CI engine using Kaner seed pyrolysis oil blended diesel
Technical and economic evaluation of separation of dimethyl disulfide from disulfide oil at liquefied petroleum gas treatment facilities of Assaluyeh gas refinery
Low complexity SVM technique of control implementation by microcontroller for three phase solar inverter
An application of full analytic hierarchy process to identify the best use of Dong Ngo closed - landfill site in Bac Ninh city, Vietnam
Comparison of fast pyrolysis bio - oils from straw and miscanthus
Co - combustion of lignite with sewage sludge and refuse - derived fuel
Optimization and assessment of an off - grid photovoltaic - diesel - battery hybrid sustainable energy system for remote residential applications
Issue Information - Info for Authors

Other Sites & Tools

Technical Groups

Technical

Professional/Personal Growth

Societal Needs

Leadership

2024 mRNA Technology Conference

5th Engineering Cosmetics and Consumer Products Conference

Upcoming Conferences & Events

2024 Eckhardt Northeast Student Regional Conference

2024 mRNA Technology Conference

5th Engineering Cosmetics and Consumer Products Conference

2024 DIERS Virtual Spring Meeting

2024 Pacific Northwest Student Regional Conference

2024 Western Student Regional Conference

CCPS Middle East Regional Meeting

Hydrogen Fueling Station Safety

Streamlining Permit-to-Work Processes With a Digital Solution

CEP: April 2024

CEP: March 2024

Explore Areas of Advancement:

Learning Center:

Want to be an Entrepreneur? Personal Stories From Three Successful Entrepreneurs Who Have Traveled This Path.

Environmental Progress & Sustainable Energy, November/December 2019, Volume 38, Issue 6