AIChE Journal, May 2018, Volume 64, Issue 5

Issue Information - Table of Contents
Issue Information
Optimal operation of batch enantiomer crystallization: From ternary diagrams to predictive control
Modeling of circulating fluidized beds systems for post - combustion CO2 capture via temperature swing adsorption
Feedback control of proppant bank heights during hydraulic fracturing for enhanced productivity in shale formations
Simulation and modeling of segregating rods in quasi - 2D bounded heap flow
Catalytic partial oxidation of CH4 over bimetallic Ni - Re/Al2O3: Kinetic determination for application in microreactor
Numerical and experimental evaluation of heat transfer in helically corrugated tubes
An innovative unit operation of particle separation/classification by irradiating low - frequency ultrasound into water
Enhanced CO2 separation performance for tertiary amine - silica membranes via thermally induced local liberation of CH3Cl
Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling
Extending the range of COSMO - SAC to high temperatures and high pressures
Simulation of gas separation using partial element stage cut modeling of hollow fiber membrane modules
Multilevel Monte Carlo applied to chemical engineering systems subject to uncertainty
Influence of mixing performance on polymerization of acrylamide in capillary microreactors
Combined effects of soot load and catalyst activity on the regeneration dynamics of catalytic diesel particulate filters
A full - condition monitoring method for nonstationary dynamic chemical processes with cointegration and slow feature analysis
Heat - transfer characteristics of polymer hollow fiber heat exchanger for vaporization application
Limiting flux in microfiltration of colloidal suspensions by focusing on hydrodynamic forces in viscous sublayer
Model fitting of sorption kinetics data: Misapplications overlooked and their rectifications
Mass transfer coefficient of tubular ultrafiltration membranes under high - flux conditions
Multidimensional modeling of a microfibrous entrapped cobalt catalyst Fischer - Tropsch reactor bed
Synthesis of Ni nanoparticles with controllable magnetic properties by atmospheric pressure microplasma assisted process
Surface nonuniformities in latex paints due to evaporative mechanisms
Nonspherical particles in a pseudo - 2D fluidized bed: Experimental study
On the mechanisms of secondary flows in a gas vortex unit
Continuous - time formulations for the optimal planning of multiple refracture treatments in a shale gas well
Removal of yield - stress fluids from pipework using water
A Numerical model of exchange chromatography through 3 - D lattice structures
Concentrated slurry formation via drawdown and incorporation of wettable solids in a mechanically agitated vessel
Experimental and numerical investigation of structure and hydrodynamics in packed beds of spherical particles
Relative time - averaged gain array (RTAGA) for distributed control - oriented network decomposition
An experimental and modeling study of vacuum residue upgrading in supercritical water
Validation study on spatially averaged two - fluid model for gas - solid flows: II. Application to risers and fluidized beds
Validation study on spatially averaged two - fluid model for gas - solid flows: I. A priori analysis of wall bounded flows
Chemical engineering and the culmination of quality by design in pharmaceuticals