| AIChE

XCEX Series of bolted-flange flameproof enclosures

The XCEX Series of bolted-flange flameproof enclosures and auxiliary devices has received the IECEx certification for use in hazardous and explosive areas. The XCEX series also meets IEC 60079-0, IEC 60079-1, IEC 61241-0, and IEC 61241-1 international standards. The enclosures are available in 81 standard sizes, all with an IP66 rating and approved for gas group IIB. They are available with window kits, conduit and cable entries, and auxiliary devices.

Fibra-X system

The compact, skid-mounted Fibra-X system reduces oil-in-water (OIW) levels without the use of demulsifiers and coagulants. It uses electrical oxidation cells consisting of multiple pairs of metal electrodes. As the water being treated flows through the plates, a direct-current voltage is applied across the plates. A release of reactive oxygen, hydroxyl, and other radicals destabilizes the surface-active components to facilitate the separation. The system is available as an end-of-pipe solution to treat produced water or slop water generated during oil and gas production.

Power Pump Drives

Available for indirect or auxiliary drives, the hydraulic Power Pump Drives are suitable for a range of engine-driven applications. They are available in four sizes, with maximum torque capacities from 413 lb-ft (560 N-m) through 4,650 lb-ft (6,300 N-m) and operating speeds from 2,100 rpm to 3,000 rpm. The pump drive is self-contained and does not require external lubrication. Internal heat exchangers can be added where required. Power take-off (PTO) clutches, pump pads, and accessories are available. Units mount to standard SAE housings and have up to eight pump-mounting faces.

WindObserver

The WindObserver is an ultrasonic wind sensor capable of continuous operation while withstanding winds up to 75 m/s and extreme weather conditions, including freezing rain. The sensor, which can monitor both wind speed and direction, is manufactured in accordance with ISO 9001. An optional pipe base mount and interface connector are provided with the unit.

Bellows Accumulators

These bellows accumulators, used to store the energy of a liquid or gas, can be manufactured in small sizes with added stroke-length capability. Their edge-welded metal bellows consist of nested rippled diaphragms that can completely collapse onto themselves as well as expand to 25% of their free length. The bellows assembly can be pressurized internally or externally. The accumulators are available in 316L stainless steel, titanium, and nickel alloys. Standard diaphragm sizes range from less than 1/2 in. to over 2 ft in diameter, but may also be manufactured to customer specification.

Innershield NR-440Ni2 wire

The Innershield NR-440Ni2 is a self-shielded, flux-cored wire suitable for offshore welding. It provides low-temperature impact toughness, and improves weldability in narrow TKY joints and poor fit-up conditions. The wire is capable of delivering a flat bead face when used in vertical-up or vertical-down welding applications, and meets H8 diffusible-hydrogen requirements over a range of humidity levels. Hermetically sealed for moisture resistance, this product is available as 5/64-in.-dia. (2.0 mm) wire on 14-lb coils.

Tube Fitting

The patented Integration Tube Fitting (i-Fitting) design is said to enable easier installation than conventional tube fittings. The design includes an inspection ring between the nut and fitting body. Once sufficient tightening has been achieved, this ring separates from the body, eliminating the need for additional tools.

Dual-Voltage Transformer

Managing electrical needs in the oilfield is an unpredictable and maintenance-intensive undertaking. This dual-voltage transformer, designed specifically for oilfield applications, has two input taps and a voltage selector switch that allow it to be used on either 480-V or 600-V rigs. This dual-usage capability helps to reduce inventory costs. The system is built for heavy-duty portable use, and incorporates additional cushioning and anti-vibration components, upper and lower core supports, stainless steel hardware, and flexible anti-corrosion coatings.

Magic Grating

The triangular structure of Magic Grating is designed to reduce slip-and-fall accidents by providing a nonslip surface for industrial floors. It may be embossed for additional traction. The wide interval of the triangular grating reduces product weight; to keep small tools from falling through, safety nets may be installed beneath the grating. This product has received European safety standard DIN 511301 approval. Magic Grating is ideal for use in frequent spill or leakage areas where oil, wax, detergent, water, and ice may accumulate.

SafeSite Area Light

Part of a series of LED lighting products, the SafeSite Area Light has achieved Class I Div. 2 certification for use in hazardous locations. It is compact and energy efficient, delivers 79 lumens per watt (lm/W), and is available with 180-deg. (forward-throw) or 360-deg. optics. It operates at temperatures from –40°F to 149°F, and has a low T5 temperature rating. A polycarbonate lens and epoxy-polyester finish allow the luminary to resist shock, vibration, and corrosion. Various mounting options are available for ease of installation.

Pages

Subscribe to AIChE RSS