April 2016 | AIChE

Other Sites & Tools

Technical Groups

You are here

April 2016

Quantification of Double Contingencies in Overpressure Design Philosophy By Fault Tree Analysis

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
The design of relief systems, specifically relief valve sizing, remains a crucial factor in mitigating the consequences of overpressure accidents in...

The Eye-Opener: Communicating Facility Siting Findings to Upper Management

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
Upon completion of a Facility Siting study, the critical path forward is acceptance from Upper Management on the remediation plan. Using an example...

Importance of Accurate, Consistent Implementation of Pressure Relief and Disposal System Standards and Guidelines

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
Pressure relief and effluent handling systems design, installation, and operation is based on published industry codes, standards, recommended...

The Use of hiTRAN Wire Matrix Technology for the Size Reduction of Heavy Crude Heat Exchangers in Separation Processes

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
The flow characteristics of heavy crude oils make them difficult to process with conventional refining equipment. Heating and cooling capacity is...

Considering External Fire to be a Non-Applicable Overpressure Scenario

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
An external fire is usually considered an applicable overpressure scenario as the necessary elements to fuel the ignition of a fire are almost always...

An "Intolerable" Risk: Applying the UK Environmental Risk Assessment Methodology to Freedom Industries, WV

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
The Environmental Equivalent of a Fatality: Had the UK's Environmental Risk Assessment Methodology Been Applied to Freedom Industries in West...

PSM/RMP Modernization Programs in California - New Developments and Correlation to Evolution at the Federal Level

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
Paper 396953, presented at the 2015 Global Congress on Process Safety, provided a snapshot of "Changes in the PSM/RMP Regulatory Framework (...

Security and Risk Mitigation: Practical and Cost-Effective Solutions By the U.S. Nuclear Industry

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
Two major events have occurred in the last 20 years which have profoundly affected the U.S. nuclear industry – the terrorist attacks of 9/11/...

Simulation-Based Assessment and Mitigation of Fouling in Water Quench and Charge Gas Compressor Sections of Gas Crackers

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
Fouling in the hot section of the separation train is widely recognized as a major challenge for successful, long-time operation of gas crackers...

Application of Dynamic Simulation in Improving Plant Efficiency

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
April 12, 2016
Application of Dynamic Simulation in Improving Plant Efficiency By Tim Song, Maryn Pols, Prakash Ramdoss CB&I 2 Riverway, Suite 1300 Houston, TX...

Pages