Thermochemical Hydrogen Production by Alkali Metal Oxides

International Congress on Energy 2011
2011 AIChE Annual Meeting
AIChE Annual Meeting
October 16, 2011 - 8:00pm

In this work, we have focused a thermo chemical hydrogen production from water by using alkali metal oxides. This system consists of three step reactions. First one is H2 generation by the reaction of hydroxide and metal 2MOH+2M→2M2O+H2 (endothermic). From the oxide as the product of first reaction, metal is reproduced to form peroxide at second step by the reaction 2M2O→M2O2+2M (endothermic). Third reaction is hydrolysis of peroxide M2O2+H2O→2MOH+1/2O2 (exothermic), resulting that hydroxide and O2 are generated. In previous work, it was reported that this hydrogen production requires more than 800 °C for potassium-system. However, it was expected that the reaction temperature can be reduced by using nonequilibrium condition. In this work, these three reactions under nonequilibrium state were investigated. The target for operating temperature of the systems is 500 °C, which can be obtained by the concentrating solar energy. It was experimentally confirmed that the first reaction proceeded below 500 °C by removing generated H2, where the Nb2O5 doped Mg was used as H2 absorbent at room temperature. In order to realize the nonequilibrium condition for the second reaction, the cooling part equipped reactor was especially designed. By condensing the metal vapor generated by the second reaction at the cooling part, the separation of metal from reaction field succeeded, resulting that the reaction proceeded below 500 °C. The hydrolysis as third reaction occurred below 200 °C and the generation of O2 and MOH as reaction products were confirmed. From the results, it was experimentally demonstrated that the hydrogen production can be controlled below 500 °C by using nonequilibrium conditions. Therefore, the system should be recognized as a potential thermo chemical hydrogen production method.
Professional Development Hours
0.5 PDHs
You will be able to download and print a certificate for these PDH credits once the content has been viewed. If you have already viewed this content, please click here to login.

Would you like to access this content?

No problem. You just have to complete the following steps.

You have completed 0 of 2 steps.

  1. Log in

    You must be logged in to view this content. Log in now.

  2. Purchase Technical Presentation

    You must purchase this technical presentation using one of the options below.
    If you already purchased this content recently, please click here to refresh the system's record of ownerships.


Credits 0.5 Use credits
List Price $25.00 Buy now
AIChE Members $15.00 Buy now
AIChE Undergraduate Student Members Free Free access
AIChE Graduate Student Members $15.00 Buy now