KDS EZflow 2010 is a durable, basic syringe pump that enhances the speed and efficiency of operation. It can be used for infusions ranging from 0.1 to 300 mL/h, with an accuracy of 2.5%. Its easy-to-read light-emitting diode (LED) display — which is visible from many angles — shows the flowrate in mL/h or can be toggled to show the total volume delivered in mL. A variety of syringes from 20 mL to 100 mL can be used with the unit. A rapid delivery key eliminates dead volume and excess air in the tubing prior to delivery of the fluids.

This caustic soda pump uses a single rotating and reciprocating ceramic piston to accomplish both the pumping and valving functions. This eliminates the need for the check valves typically found in diaphragm pumps; such valves are subject to caustic soda crystallization, which affects sealing and allows backflow.

Triplex Series high-pressure pumps perform in spraying, misting, filtration, cooling, dispensing and pressure-boosting applications. These self-priming, three-chamber pumps operate at flowrates of up to 1.4 gal/min (5.3 L/min) and at operating pressures of up to 150 psi (10.3 bar). They are built using co-injection molding technology, which eliminates potential leak paths and allows the units to run dry for long periods without damage.

These high-solids pumps dramatically reduce the costs of transferring biomass slurries and distillers dried grains with solubles (DDGS) byproducts compared to conveyor systems, which tend to be more expensive and maintenance-prone. Based on a technology advancement suitable for biodiesel and ethanol plants, as well as distilleries, grain processing, and feed mills, they easily handle abrasive and corrosive DDGS applications.

Three primary application areas are the subject of this 32-page catalog of the company’s air filter systems, equipment and capabilities. Comfort air product lines include HVAC particulate filters and hardware, as well as Camsorb carbon panels, cylinders and multi-stage adsorption systems. Clean process (cleanroom) products include HEPA and ULPA filters and frames, terminal filters, ceiling modules and replacement filters. Safety and protection products include bag-in/bag-out housings, HEGA filters, isolation dampers, bags and accessories for the containment of hazardous contaminants.

The Series TRVDT three-port, in-line relief valve is ideal for systems requiring minimal footprint or where the use of a piping tee is not practical. It has an economical, heavy-duty design that allows for easy replacement in existing systems. When closed, the valve has a straight-through flow pattern. The pressure setpoint is adjustable between 50 and 100 psi, and the maximum inlet pressure is 150 psi. Once the set pressure is reached, the diaphragm is lifted off the center port, and the excess liquid flows out through the third port at the bottom of the valve.

This comprehensive CD-ROM provides a wealth of information and technical data about a variety of separation products. It covers mist eliminator theory and proper installation procedures for designs ranging from high-efficiency, double-pocket vane to submicron candle mist-eliminators. For liquid/liquid separations, coalescers and common applications in which they are especially effective are discussed.

Suitable for batch or continuous high purity processing, these stainless steel fractional distillation systems can be applied to many industries, such as foods, flavors, fragrances, pharmaceutical intermediates and fine chemicals. Available with 1– 24-in.-sized columns and throughputs from 1 kg/hr to 1,000 kg/hr, the systems are ideally sized for small to mid-sized production or pilot-plant service. The equipment is flexible enough to allow users to construct and modify their own units.

These specialty filters handle a wide range of liquid process applications in many industries. LOFMEM Series membrane cartridges are absolute-rated filters that provide precise, repeatable, sub-micron filtration. LOFPLEAT Series cartridges have a pleated configuration that provides higher surface area than depth filters for improved dirt-holding capacity and a longer onstream life. LOFTREX Series depth filtration cartridges are cylindrical filters with a circuitous path that captures a wide range of particle sizes and gelatinous contaminants

The web-based Chromatography Resource Center focuses on high-performance liquid chromatography (HPLC), gas chromatography (GC) and solid-phase extraction (SPE) consumables and their use in the pharmaceutical, biotechnology, environmental, chemical, and food and beverage industries. It features a virtual library that offers technical guidelines, application notes and recent scientific posters. One value-added benefit is a compendium listing more than 400 applications categorized by industry.