The low-profile Flo-Thru sifter features a gap-free screen frame with quick-disconnect clamps and a crevice-free interior finished to cGMP, 3-A, USDA and FDA standards. This finish allows a rapid, thorough washdown. Its design significantly reduces minimum height requirements with two unbalanced-weight gyratory motors mounted on opposing exterior sidewalls of the unit, rather than the usual single motor positioned beneath the screening chamber.
These dust collection cartridge filters feature an advanced nanofiber filtration technology that allows them to last twice as long as cellulose and 80/20 commodity filters. The novel technology allows advancements in surface loading capabilities, including a surface treatment of synthetic nanofibers, which forms a nanoscopic mesh to trap dust particles on the filter’s surface. The particles are released easily during the cleaning cycle and lower the pressure drop over the life of the filter.
This catalog provides an overview of magnetic separation equipment for removing ferrous contaminants from dry particulates, liquids and slurries. It includes application data, descriptive photographs, diagrams, and specifications on an extensive line of equipment — from basic cartridges, grates and plate magnets to magnet housings, self-cleaning separators, pulleys, drums and liquid traps. Also available is a 36-page specification guide that gives size options, descriptions, definitions,and more.
The Scienceware separatory funnel rack can hold funnels in a variety of sizes for different experiments. Its funnel slots have adjustable diameters that accept sizes from 100 cm3 to 1,000 cm3, and its two support tiers can be independently adjusted to any height along the 29-in. rods. The rack has a durable, chemical-resistant plastic base that measures 16 in. by 7.8 in. and is weighted for stability.
FunnelFit pre-formed conical filters are suitable for organic extract drying applications. They are designed to fit the funnel perfectly every time, which eliminates the need to use costly solvents for wet-down and to keep quadrant-folded or pre-pleated filters in the funnel. FunnelFit filters ensure reproducible, high-quality results by avoiding inconsistent and time-consuming preparation steps that may cause sample bypass, tip blow-out, and contamination. Available in three quantitative ashless grades, they are conveniently packaged in stacks of 100 for fast and easy handling.
Custom precision die-cut membranes are manufactured to specification using a proprietary process that produces smoother edges than compression cutting and is performed in a clean, positive-pressure facility. They can be produced from a dxf, pdf, or almost any type of drawing file, are made from polytetrafluoroethylene (PTFE), nonwovens and other materials, and can incorporate intricate shapes, including narrow cross-sections and close hole spacing. Membranes as small as 1 in.2 with ±0.005 in. tolerances can be supplied on rolls, with or without an adhesive backing.
The Model 6V employs a specially formulated collector tube that skims oil from the surface of water. The oil adheres to the outside of the closed-loop tube, which is slowly drawn across the surface of the water and into the skimmer. Scrapers remove the oil, which accumulates in a collection chamber. The clean tube then returns to the water to skim more oil. The tube automatically adjusts to varying water levels and is flexible enough to wind over and around floating debris. The system can skim up to 100 gal/h, and is designed to operate 24/7.
A modular design allows the addition of a vibrating fluid-bed dryer, cooler and deduster to the Witte 300 screener, even years after the original equipment was installed. Combining multiple functions in a compact, quickconnect/ disconnect unit saves floor and overhead space and allows the unit to be moved among multiple production lines. Because the screener can be retrofit to handle additional functions, processing capabilities can be expanded without replacing the screener or buying a separate dryer or cooler.
The automatic, incrementally rotating Roto-Pulse uniformly cleans 30–40% more filter surface than conventional reverse-pulse systems. The additional area of clean media means a lower air-to-cloth ratio requirement, lower grain loading, more-efficient filter cleaning, and longer filter life. The system operates by pulsing air into a specially designed stainless steel perforated tube.
The Centra-flo Upflow Filter can be used in virtually any application requiring the removal of suspended solids. It combines an upflow design with deepbed sand filtration and continuous cleaning to achieve high-quality filtrate with consistently low head loss at varying flow rates. The upflow filter provides a continuous supply of filtered water without interruption for backwash cleaning, making it unnecessary to shut down for backwashing. In addition, the continuous backwash design provides a steady reject stream that eliminates backwash hydraulic surges.
