These 360-µm high-pressure fittings allow direct connection of 360-µm-OD fused silica, polyetheretherketone (PEEK), stainless steel, or electroformed nickel tubing without the need to use liners. With fine 2-56 threads, the compact fittings provide a leakfree connection that seals at pressures well in excess of 20,000 psi. They can be easily formed with a manual tool, and are available with a PEEK or stainless steel nut; the PEEK nut is supplied with a glass-filled PEEK ferrule, while the stainless nut uses a 316 SS ferrule.

Clampseal Urea Service Valves are designed to control the flow in high-pressure piping used in urea reactors, strippers, and condensers handling ammonium carbonate, nitric acid, and urea process fluids. These valves comply with all international standards including ISO 9001, and can handle pressures through ASME/ANSI Class 2500. They come in 0.5–4-in. sizes with flanged end, hub connector, or weld end options, and feature a pressure-actuated back seat; integral gland wrench; modular, interchangeable body styles; and axial-loading packing system.

The Type 131 and Type 133 electrically actuated ball valves are adaptable to a variety of conditions and applications — from simple on/off control to more-sophisticated automated flow control using the optional PE25 flow control positioner to continually and precisely move the valve to the desired position. The valves are available in polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polypropylene, and polyvinylidene fluoride (PVDF), and in sizes of 3/8 in. to 4 in.

The energy-efficient E Series family of pneumatic solenoid valves is specifically engineered for air and dry gas applications, and features a low power consumption of just 0.65 W. A nickel-plated body and coil housing construction make it highly durable and corrosion resistant. These solenoid valves feature a compact cylindrical body, with diameters less than 0.75 in. (19 mm) and lengths under 2 in. (50.8 mm), and orifice sizes ranging from 0.032 in. to 0.078 in. (0.81 to 1.98 mm).

The High Flow direct-mount solenoid valve is a cost-effective solution for general-purpose valve actuator applications in the chemical process, pulp and paper, food and beverage, and pharmaceutical industries. The valve has a life expectancy of up to 5 million cycles, and is built with an anodized aluminum body and a stainless steel spool, with internal parts made of brass. The compact valve features a NAMUR mounting pattern and is designed for direct mounting in any position on a NAMUR interface.

The CDA-22 chlorine dioxide (ClO2) analyzer features a panel-mounted plumb-and-play design and automatic ?ow control in a low-maintenance complete measurement system for monitoring and control of chlorine dioxide ClO2 in municipal water systems, industrial cooling and rinse water, wastewater, or fresh water. It uses a polarographic gold/silver polytetra?uoroethylene (PTFE) membrane amperometric ClO2 sensor to measure ClO2 concentrations ranging from 0.05 ppm to 20 ppm. The analyzer/controller is mounted on a PVC panel and features a 2.5-in. × 1.75-in.

The Ultra-Violet Optical Screening Tool (UVOST) is a direct-push-delivered sensor that allows rapid screening of most petroleum-based light nonaqueous phase liquids (LNAPLs), such as fuels, lubricants, and crude oils, without interference from dissolved-phase hydrocarbons. Using laser-induced ?uorescence (LIF) technology, it immediately detects subsurface contamination without having to draw samples or wait for lab results. As the probe is driven into the ground, the LNAPL’s ?uorescence signal is sent through a ?ber-optic cable to a detector and logged by a laptop computer.

Dowex Marathon C10 effectively removes contaminants from water in industrial water demineralization, condensate polishing, and softening applications. The strong-acid cation exchange resin has beads of uniform particle size that exhibit more consistent exhaustion, regeneration, and backwash than conventionally sized resins. A higher level of crosslinking also provides stability to compressive, osmotic, and oxidative stresses.

Oil Eater Naturals are eco-friendly absorbent pads, rolls, and socks that are designed to provide a safer and cleaner workplace while helping users meet U.S. Occupational Safety and Health Administration (OSHA) and U.S. Environmental Protection Agency (EPA) requirements. The products are made of natural plant byproducts and feature woven construction. They are suitable for production lines, industrial and maintenance facility ?oors, loading docks, and other areas, and are available in 16-in.×18-in. pads and 28-in.×150-ft rolls.

The Purair ECO line consists of energy-ef?cient ductless containment cabinets that minimize stress on heating, ventilating, and air conditioning (HVAC) systems without compromising protection for personnel and the environment. They are available in ?ve standard sizes and with a choice of controllers, including the company’s new ECOair touchpad control with a color display interface.