The Hydraulic Bulk Bag Conditioner loosens bulk solid material that has solidified during storage and shipment, enabling bulk bag unloaders to discharge it through bag spouts. The conditioner features two hydraulic rams with specially-contoured end plates to press opposing sides of the bulk bags. An optional hydraulically-actuated, variable-height turntable allows in-frame bag rotation and conditioning of bulk bags at varying heights. The number and pressure of hydraulic ram actuations, the height of the turntable, and the number of 90-deg rotations are user adjustable.

This firm’s Wet-Mix Process Systems provide users with a finished product that is homogeneous, has repeatable viscosity and dispersion down to one micron, and is consistent from batch-to-batch. Featuring a colloid mill and positive-displacement feed pump, systems can be designed for handling viscous materials from 1,000 cP and up, with flowrates from 0.5 to 300 gal/min, depending upon the application.

Well-suited for preparing samples for XRF or similar analyses, the Vibratory Disk Mill RS 200 features a powerful 1.5-kW stabilized plane drive that achieves grind sizes between 40 and 100 mm within seconds. The standard deviation of d90 values is only half compared to other disk mills. Samples of up to 250 ml with a maximum particle feed size of

The C-Series line of vacuum conveyors are ideal for handling ingredients such as cocoa, sugar, powdered drink mixes, vitamins and coffee beans. Powered by the manufacturer’s pneumatically driven vacuum pumps, these systems safely and quietly transport up to 10–15 tons/h of powders and granules in virtually any manufacturing or processing environment. The vacuum conveyors are made from stainless steel AISI 316L and can cope with demanding circumstances. The filter design can trap particles down to 0.3 mm and can be equipped with a high-efficiency-particle-arrestment (HEPA) filter.

The 24-in. Pipeline Delumper is a powerful inline processor that crushes, disperses and suspends tough solids in fully enclosed pipe systems. The unit is specifically designed to handle oversized agglomerates including granular polypropylene and polyethylene. This unit eliminates blockages, works the stream to free flow and prevents damage to pumps and other equipment. It is suitable for wet, dry, pressure or gravity systems. The ultra-compact, straight through Pipeline Delumper is designed for easy installation.

“The Evolution of Milling Technology” showcases a range of products and services. It outlines the process of solving a size-reduction problem, from initial analysis of the problem and the customer’s size-reduction requirements, to testing and evolution, to recommendations of the most cost-effective milling solution. Among the services covered are product development, toll processing, equipment refurbishing, and particle size analysis.

This 8-page brochure features application photos of the ROPAK reusable container systems in a variety of applications. General-purpose handling applications highlighted include adhesives and chemicals; small and uniform parts handling applications include dry chemicals, pharmaceuticals, plastics, resins and powders. The brochure also provides details on the company’s range of products and services, including dunnage design, repair, leasing, fabrication and recycling.

This brochure features a line of roller compactors for pharmaceutical and related applications, and presents the uses and benefits of dry granulation. Specific information on the Pharma Series of compactors, as well as details on the patented Combi-Vent Feeder technology, are also included.

This brochure describes the company’s profile wire-screen product line used to engineer catalyst bed supports, flat and curved sieve screens, inlet and outlet baskets, nozzles, complete hub and header lateral systems, center pipes, basket strainers, resin traps, and numerous other standard and inverted flow-filtration applications. Wedge Wire industrial screens are constructed of a series of V-shaped cold-drawn wire that is then cold-wound welded on perpendicular support rods to produce a smooth, structurally sound plug-resistant screen surface.

Like its predecessors in the SmartConnex line of feeder controls, the new K-Tron Control Module (KCM) integrates the control and motor drive modules directly on the feeder. It can function as either a volumetric or gravimetric feeder controller, and supports all of the firm’s feeders that are equipped with SFT II or SFT III load cells, including volumetric feeders, loss-in-weight feeders, weigh-belt feeders, smart flowmeters and PID applications.