The T2 pressure transducer delivers better than ±0.25% full-scale static accuracy and high durability in the presence of overpressure, shock, vibration and extreme pressure cycling. Configure it with the manufacturer’s Type 330 flush-mount mini-diaphragm seal, and the system will reliably monitor harsh media pressures
The TF16-N NIR absorption sensor measures solids, turbidity, concentration, consistency and optical density. Its dual-beam design compensates for background color or color changes. Designed to control and automate a variety of demanding industrial gas and liquid processes, the TF16-N monitors in-line for precise, real-time results that are repeatable. The sensor body is 316L stainless steel with sapphire optical windows. It is suitable for CIP/SIP applications, with optional hazardous-area classification available.
Built to minimize startup time, determine exact chemical endpoints and optimize product consistency, these patented in-line and on-line process analyzers track critical quality parameters for bulk chemical, drying, mixing and biological processes. One analyzer, the Optimized Powder Analysis Probe, is specially designed for measuring powders during semi-turbulent flow drying. Also made for use during drying processes, the Optimized Purge Probe features a collecting “spoon” for measuring powders.
SmartMesh systems provide original equipment manufacturers with complete, embedded wireless sensor networking (WSN) that meets the stringent requirements for high-reliability, ultra-low power, security and flexibility demanded by the industrial market. These systems are made up of wireless motes embedded in individual sensor nodes and network managers embedded in gateways. They are proven, scalable and easy to integrate for fast time-to-market applications.
The new EasyLine3000 Series analyzers complement the high-end Advance Optima 2000 multi-analyzer configuration with a simple, general-purpose design in a single compact housing. Available in a panel or cabinet configuration, the ACX is a complete analyzer system that features AO2000 control and monitoring of all system parameters, including automatic calibrations, component status, and common digital output communications.
8262/8263 Series two-way direct-acting solenoid valves can be used to control the flow of air, water, or light oil. They are available in normally closed, brass and stainless steel constructions for pipe sizes of 0.125 in., 0.25 in., and 0.375 in. The online configuration tool enables a customer to quickly model a valve to meet a set of specific requirements. It then displays the list price, availability, 3-D computer-aided design (CAD) drawings, and specifications for the configured product.
The 270/NH3 gas sample probe and ammonia converter provides both a converted and an unconverted sample stream. This provides a way to measure the ammonia slip that is normally found at the exit of a selective catalytic reduction (SCR) unit using the dual NOx differential method. By combining the sample probe and ammonia converter, a single unit provides both filtration and conversion at the source of measurement. The device comes with an aggressive blowback (filter purging) and a calibration-gas inlet port for compliance with U.S. Environmental Protection Agency regulations.
The ioLogik W5340 Active GPRS I/O is an active Ethernet input/output (I/O) device that uses general packet radio service (GPRS) technology. It is suitable for remote monitoring and alarm applications in hard-to-wire locations, such as along pipelines and at unmanned sites. Used with the manufacturer’s Active object linking and embedding for process control (OPC) server, it can create a remote monitoring and alarm system in GPRS dynamic Internet protocol (IP) environments.
Industry experts will present free educational workshops covering plant performance benchmarking, operations and maintenance (O&M) information handover, and asset performance management (APM). The benchmarking workshop will discuss how to use industry tools to collect and report benchmarking information, and how an owner/operator can take advantage of these data and other metrics to gain a competitive edge in global markets. The O&M meeting will report on guidelines for more effective transfer of information needed for operations and maintenance.
The OMS420 in situ O2 and CO/combustibles analyzer features a hollow probe design that allows a single technician to remove sensors for maintenance in seconds. It has a zirconium oxide sensor for analyzing oxygen and an additional heated electrolyte sensor for working with carbon monoxide and combustibles. The unit enables workers to tune excess O2 to lower levels than possible using O2 measurements alone. This results in greater fuel efficiency and savings.
