Case Studies (Sustainability & Environment)

Sustainable R&D for new Technology in Start Ups

Conference Presentation
Southwest Process Technology Conference
Friday, October 10, 2014 - 1:00pm-1:30pm
Often Start Ups develop technology for building block chemicals from renewables. DOE has a list of 12 such building blocks, such as glucaric acid,...

2014 Conference Keynote

Conference Presentation
Southwest Process Technology Conference
Thursday, October 9, 2014 - 8:30am-9:15am
Strong process research organizations and capabilities constitute very relevant competitive advantages in the chemical industry, enabling constant...

PM2.5 Modeling Challenges

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Monday, March 31, 2014 - 10:45am-11:00am
Air Dispersion Modeling is usually required to demonstrate compliance with the Ambient Air Quality Standards for PM 2.5 in support of an air permit...

From Zero to World No.1 LNG Exporter in Less Than 10 years, Qatar

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Monday, April 29, 2013 - 3:30pm-4:00pm
Qatar is a member of the OPEC and is a significant oil producer, but the Qatari government has devoted much more efforts to the development of...

Greenhouse Gas Permitting At the BASF-Total Petrochemicals Cracker

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Monday, April 29, 2013 - 2:30pm-3:00pm
The permitting of greenhouse gasses (GHG) is new to industry, the States, and to the Environmental Protection Agency. The process is further...

NETL CO2 Injection and Storage Cost Model

Conference Presentation
AIChE Annual Meeting
Tuesday, October 30, 2012 - 10:15am-10:30am
The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a model to estimate the costs of storing captured CO 2 ...

Targeting Material Reuse via Property Integration

August
2005
Environmental Management
__
Mahmoud M. El-Halwagi
Vasiliki Kazantzi
Material reuse is often governed by the functionalities of the process streams. This new property-based technique creates a pinch diagram that identifies targets for the minimum use of fresh resources and waste discharge, and the maximum integration...
Subscribe to Case Studies (Sustainability & Environment)