(62a) Intrusive Probes in Riser Applications | AIChE

(62a) Intrusive Probes in Riser Applications

Authors 

Chew, J. W. - Presenter, Nanyang Technological University, Singapore
Cocco, R., Particulate Solid Research, Inc. (PSRI)
Karri, S. B. R., Particulate Solid Research, Inc. (PSRI)
Knowlton, T., Particulate Solid Research, Inc.
Findlay, J., PSRI
Gauthier, T., IFP Energies nouvelles
Hrenya, C., University of Colorado
Many of the probes used to understand hydrodynamics in circulating fluidized bed risers intrude into the environment they are measuring, although assumptions are typically asserted that the intrusive probes do not affect the data collected. This could be a poor assumption in some cases and conditions. We found that intrusive fiber optic probe measurements consistently mis-predicted the solids concentration compared to the non-intrusive pressure drop measurements outside the fully developed flow region of a riser containing fluid catalytic cracking catalyst or glass bead particles. The discrepancy was sensitive to superficial gas velocity, solid circulation rate, probe position and flow direction. Barracuda VRâ„¢ computational fluid dynamics simulations confirmed this, and indicated that particle momentum was lost at the leading edge of the probe and particles were spilling over to the probe tip. Accordingly, new probe designs were proposed to mitigate the intrusiveness of a fiber optical probe for more accurate characterization.

Topics