(54w) Numerical Simulation on Fine Particle Transport Behaviour in Electrostatic Precipitators | AIChE

(54w) Numerical Simulation on Fine Particle Transport Behaviour in Electrostatic Precipitators

Authors 

Dong, M. - Presenter, Dalian University of Technology
Electrostatic precipitators (ESPs) are a major air pollution control device to remove particles from treated gas. Extensive research has been done on several aspects such as electrostatics, fluid dynamics, charging mechanism, and particle dynamics. The overall particle-collection efficiency of a modern industrial wire-plate ESP exceeds 99%. However, the removal efficiency of submicron particles by conventional ESPs is as low as 70–80% owing to the low charge carried by fine particles and the increase in mobility with decreasing size. Submicron particles possess a high superficial area, thus favouring toxic heavy metals and other pollutants. Therefore, fine particles are collected with much lower efficiency and further research is required to improve this aspect.

In this work, a numerical study on the charging and transport behaviour of fine particles has been carried out based on wire-plate electrostatic precipitators (ESPs) with multiple wire electrodes. The effect of the applied wire voltage, inlet height, and wire distance on particle charging and transport behaviour, and the influence of the precipitator structure on particle trapping are analysed in detail. The 2-D numerical model involves electric field, space-charge density, gas flow, and particle trajectories. The fluid-flow velocity is higher than 1 m/s in this study and the EHD flow has a negligible. A Lagrangian approach for particle transport is utilized with the trajectories of individual particles tracked by solving their equation of motion. The electric field and gas flow are calculated using the finite-volume method. The flow simulation is done using the commercial software FLUENT with other parts coded as user-defined functions. The following main results can be drawn:

(1) It was observed that the Y-displacement of the particles exhibited a universal increase for all particle sizes, especially for larger particles, at low injection positions (Y < 25 mm). The larger the particle size, the higher the Y-displacement of particles because larger particle sizes improve both the particle charging level and electric field strength. No significant improvements were found for submicron particles.

(2) Increasing the spacing of the discharge electrode within a certain range and therefore increasing the electric field, it was observed that the particle-trapping effect improved and the outlet level exhibited a universal increase for all particle sizes, especially for large particles.

(3) The ESP models M1 and M2 were used to investigate their influence on the outlet height. Except for particles with a diameter of 2 µm, all other particle sizes showed an increased outlet height in M2 compared to that in M0. In addition, the different discharge-electrode arrangements, especially in M2, exhibited significant effects on the charging and transport behaviour of particles with a diameter of 1 µm.

(4) Particles with an inlet height of 5 and 10 mm were studied in M1 and M2 precipitators. The changed discharge-electrode arrangement improves particle trapping, especially in M2. This is because of the electron trajectories being closer to the discharge electrodes (M2), giving the particles more charge and leading to a greater electric field.