Flow of Solids in Bins, Hoppers, Chutes and Feeders - December-2012

Flow of Solids in Bins, Hoppers, Chutes and Feeders

Course ID: 
CH032
Course Type: 
Instructor-led (classroom) Course
Course Length: 
2 Days

Too often, bulk solids are being handled without a good understanding of how to correctly design, select, troubleshoot, maintain and purchase bulk solids handling equipment.

As a result, costly flow problems occur that slow production. In this course, you’ll learn proven design and troubleshooting principles for handling bulk solids in bins, hoppers, feeders and transfer chutes for safe and trouble-free plant operation.  
 

Ensure equipment operates efficiently, safely and reliably

 
In two days, you’ll review the fundamentals of bulk material flow and examine common flow problems, types of flow patterns in equipment and how flow properties of bulk solids are measured. You’ll consider feeder design, learn proven troubleshooting techniques and gain insight into flow problems that occur when handling fine powders. The instructor also covers common mechanisms of segregation and solutions to these costly problems and gives practical advice for using flow aid devices.
 
Throughout the course, real-life industrial case histories illustrate the complex concepts you’ll learn. In addition, workshops help increase your understanding of the theory and application.
 
Save when you take both this course and CH033 - Pneumatic Conveying of Bulk Solids  by registering for CH757 - Solids Handling Combo Course
Continuing Education Units: 
1.5
Professional Development Hours
15.0 PDHs
Instructor(s): 

Andres Orlando

Andres Orlando is a Project Engineer with Jenike & Johanson.  Andrés received his B.S. in Mechanical Engineering and Ph.D. in Granular Mechanics from Clarkson University. His graduate studies focused in computational modeling of granular materials flows and comparing numerical models against physical experiments. 

Prior to joining Jenike & Johanson, he spent a year at the University of Southern California researching the micromechanical behavior of sheared sands. As a project engineer for Jenike & Johanson he has been involved in troubleshooting and recommending...

Herman Purutyan

CEO of Jenike & Johanson Inc., a world-renowned engineering consulting firm specializing in the storage, flow and processing of powder and bulk solids. He has been recognized worldwide for his technical ability and experience in the field of storage and flow of solids. He has 20 years of experience designing solids handling systems and troubleshooting handling programs in a wide variety of industries.

Pricing

AIChE Members $1,295
AIChE Grad Student Members $647.50
AIChE Undergrad Student Members $647.50
Non-Members* $1,495
Training 10 or More? Volume Pricing is available. Send an e-mail to

edu@aiche.org for more information.

* Membership is just $199 a year. For more information on becoming an AIChE member click here.

If you are interested in scheduling this course for In-Company Training, please complete the Request for Proposal Form and we will e-mail you a proposal.
 

Registration

Note: Registered attendees will receive an email 4 weeks before the course start date notifying them of the status of the course. Please do not book airline tickets before you receive notification as we cannot reimburse tickets or airline change fees if the class is not held. If you have any questions, please call Customer Service (800.242.4363 or 203.702.7660 outside US).

September 16-17, 2014

Houston, TX
United States

December 9-10, 2014

Orlando, FL
United States

Questions? Check out the Frequently Asked Questions or email us at eLearning@aiche.org

Accommodation Instructions: 
Mention you are attending a course at the AMA Conference Center to receive the best available rate (applies to all three properties).