5th Engineering Cosmetics and Consumer Products Conference April 22-24, 2024 Le Méridien Philadelphia, Philadelphia, Pennsylvania, USA
5th Engineering Cosmetics and Consumer Products Conference April 22-24, 2024 Le Méridien Philadelphia, Philadelphia, Pennsylvania, USA
2024 Pacific Northwest Student Regional Conference April 26-27, 2024 University of Idaho, Moscow, ID, USA
CCPS Middle East Regional Meeting April 30, 2024 SIPCHEM R&D Center (MANAR), Dhahran Techno Valley, Saudi Arabia
6th Middle East Process Engineering Conference and Exhibition May 6-8, 2024 Dhahran Expo, Dammam, Kingdom of Saudi Arabia
Archived Webinar Want to be an Entrepreneur? Personal Stories From Three Successful Entrepreneurs Who Have Traveled This Path.
Moinuddin Malik Citation name Malik, M. Affiliation Stevens Institute of Technology State NJ Country USA Authored(604e) Twin Screw Extrusion Of Nanoenergetics With Processing Geometries That Are Tunable To The Targeted Thermo-Mechanical HistoryDilhan KalyonSeher OzkanMoinuddin MalikJames E. KowalczykMark Mezger2007 Annual Meeting (666c) Incorporation of Pressure Dependent Wall Slip to the Simulation of the Continuous Processing of Energetic SuspensionsDilhan KalyonMoinuddin Malik2008 Annual Meeting (582a) Imposition of the Pressure-Dependent Wall Slip Condition in Mathematical Modeling of the Continuous Processing of Energetic Materials: Twin Screw Extrusion and Die FlowsDilhan KalyonMoinuddin MalikMichael FairDavid Fair2009 Annual Meeting (582e) Theoretical Analyses of Co-Extrusion Process for Co-Layered Energetic Extrudates and Experimental Investigations of Co-ExtrusionSuzanne PrickettRichard MuscatoDilhan KalyonHalil GevgililiChristopher GonzalezMoinuddin Malik2009 Annual Meeting (707g) Mathematical Modeling of the Continuous Processing of Energetic Materials In Conjunction with a Pressure Dependent Wall Slip ConditionDilhan KalyonMoinuddin Malik2011 Annual Meeting (707f) Linking of Deterrent Concentration Distributions to Ballistic PerformanceJohn BologniniSarah LongoCarlton AdamDilhan KalyonMoinuddin MalikHalil Gevgilili2011 Annual Meeting (607h) Mathematical Modeling of the Co-Rotating Twin Screw Extrusion Process and Experimental StudiesDilhan M. KalyonMoinuddin Malik2005 Annual Meeting (473f) Twin Screw Extrusion Processing of Double Base PropellantDilhan M. KalyonMoinuddin MalikJames E. KowalczykSuzanne PrickettWayne G. ThomasChristopher M. Radack2005 Annual Meeting (473d) Development of a Co-Extrusion Process for Propellant ManufactureSuzanne PrickettChristopher GonzalesRichard MuscatoCollier ClineDilhan M. KalyonMoinuddin MalikJames E. Kowalczyk2005 Annual Meeting (511b) Optimization of the Selection of the Extruder Type, Geometry and Operating Conditions for the Processing of Nano-Energetic Materials Based Fem Analysis of the ProcessMoinuddin MalikDilhan KalyonJames E. Kowalczyk2005 Annual Meeting (665c) Coating of Energetic Grains with Deterrents to Tailor Ballistic PerformanceJohn BologniniCarlton P. AdamDilhan KalyonHalil GevgililiMoinuddin Malik2010 Annual Meeting (665a) Sensitivity Control of Energetics through Optimization of Processing Geometry and ConditionsDilhan KalyonMoinuddin MalikHalil Gevgilili2010 Annual Meeting Associated proceedings 2007 Annual Meeting 2008 Annual Meeting 2009 Annual Meeting 2011 Annual Meeting 2005 Annual Meeting 2010 Annual Meeting
