These cast aluminum pressure blowers are ideal for providing low-volume, high-pressure air for cooling, ventilating, and exhaust systems that handle dust, materials or corrosive fumes. These direct-drive (TPD) or belt-driven (TPB) blowers feature heavy-duty cast aluminum housings with cast aluminum wheels for extra long life and trouble-free service. Capabilities include: airflow capacities to 4,400 ft3/min and static pressures to 20 in. w.g
The Vortex HDP slide gate handles non-abrasive to abrasive powders, granules and pellets. It isolates pressures up to 5 bars (75 psig) depending on size and will not leak to atmosphere or across the valve. The maintenance-friendly HDP slide gate contains a displacement pocket that reduces/eliminates material packing as the blade closes.
The compact SDX spray drying nozzle features a new positively retained swirl chamber and orifice disc and a unique flow distribution design in-built to the swirl chamber. The nozzle is extremely short — less than 38 mm (1.50 in.) Unlike the firm’s Mini SDX, it is user-friendly and requires no tools are required for assembly. The new swirl chamber features a unique flow distribution design and the matching orifice assembly uses a retained O-ring feature.
The outside face seal (OFS) is ideal for the containment of vapors in vertical-shaft vessels and can operate without a purge or flush system. It is particularly suited for top-entry agitators, where long, cantilevered shafts can exhibit high runout and angular misalignment. The OFS will permit significant axial motion, making it ideal for applications where there is shaft float and thermal expansion. The seal is available unsplit or fully split, and in a wide variety of materials combinations for maximum compatibility with acids, bases and aromatic hydrocarbons.
The V-Slam is designed for size reduction of minerals, ores and chemicals. It is available to process up to 2-in. feed for particle size reduction down to 6–8 mesh. Its key benefits include: speeds of up to 12,500 ft/min; 5–100 ton/h capacity range; indexing feed tube and anvil ring; automatic recirculating lubrication system; and portable or stationary impact crusher.
The 7200 series Mini Bear Pad load cell is a low-profile, mounted solution for vessels or conveyors, process control, batching and all industrial weighing applications, including clean applications such as food and pharmaceuticals. The load cell comes with a base plate (standard) and attaches directly to the vessel or conveyor via either a single 1/2-in. or 5/8-in. screw mounting kit with grommets and locking washers or an optional top mounting plate. With this new technology, common placement problems associated with top pins, links, fix or floating mounts are eliminated.
The EC-201 robotic palletizer has a payload capacity of 440 lb and a palletizing capacity of 1,600 cycles/h. The unit palletizes bags, cases, pails and other various products. It also has four axes for maximum flexibility. The weight of the mechanically balanced arm can be supported by a single finger. This unique design allows the EC-201 to use less energy and reduce stress on the arm joints, bearings, pivot points and floor supports.
The IC33 series of vacuum conveyors is based on a newly patented pump technology that uses less energy compared to competing compressed-air-driven conveyors. The compact design of the conveyor makes it possible for the user to secure floor space that otherwise would have been occupied if using more space-demanding belt or screw conveyors. As the material is conveyed in pipes or hoses, this solution is also more flexible, according to the manufacturer.
The BSP-135 and BSP-150P are the latest addition to the Bulk Solids Pump feeder line. These units are specifically engineered to provide gentle, precise feeding of free-flowing pellets, granules, flakes, powders and friable products utilizing a patented principle called positive-displacement feeding. The BSP-135 features three feeding ducts and will replace the BSP-125, which had two ducts, extending the feed rate range to 155 ft3/h.
The Quadro Vac reduces dust contamination when employed in a tablet manufacturing suite. It is a user-friendly, high-end, sanitary pneumatic conveyor that is used in both pharmaceutical and food plants. The Quadro Vac’s sanitary construction makes it easy to clean and its modular design can be quickly dismantled/re-assembled. The unit is constructed of stainless steel with a rugged mechanism for maximum reliability and minimum maintenance.
