(55c) Flare Reduction Strategies for LNG Plant Design
- Conference: AIChE Spring Meeting and Global Congress on Process Safety
- Year: 2016
- Proceeding: 2016 AIChE Spring Meeting and 12th Global Congress on Process Safety
- Group: Global Congress on Process Safety
Monday, April 11, 2016 - 4:30pm-5:00pm
A typical LNG flare system includes Warm (or Wet), Cold (or Dry), and Low Pressure (or LP/Marine) flares. The disposal of streams with potentially freezable components originating from plant inlet and gas treating sections is achieved through the Warm flare. The Cold flare is utilized to dispose streams with non-freezable components and very low operating temperatures. Low pressure streams from the storage or loading area of the LNG plant are routed through the LP flare for safe disposal. Based on project design criteria, flare system can require elevated, ground, enclosed, or smokeless flare design.
Addressing flare optimization issues provides opportunities for controlling material loss during plant operation. In this paper, an overview of factors that influence flare type selection and determine flare size are discussed. Significance of flare type and size for overall plot space requirements is also addressed. Based on typical major relieving scenarios, flare load reduction strategies for each of the LNG plant flares are presented.
LNG plant design configurations for multiple trains, refrigerant compressors, and process recycle streams can significantly affect design flare loads. High design flare loads increase flare size and require large plot space due to flare radiation limits. Proper selection of design options for major LNG plant sections guided by flare reduction strategies can help in reducing flare design flow rate, flare size, and plot space requirements.
This paper has an Extended Abstract file available; you must purchase the conference proceedings to access it.
Do you already own this?
Log In for instructions on accessing this content.
|AIChE Graduate Student Members||Free|
|AIChE Undergraduate Student Members||Free|