(104ag) A Comparative Analysis of Two Approaches for Pool Evaporation Modeling: Shrinking Vs. Non-Shrinking Pool Area | AIChE

(104ag) A Comparative Analysis of Two Approaches for Pool Evaporation Modeling: Shrinking Vs. Non-Shrinking Pool Area

Authors 

Meel, A. - Presenter, Safer Systems


Prediction of pool evaporation rates in the event of liquid spills is an important topic in the area of emergency response and has been actively studied by many researchers.  The modeling of pool evaporation involves the vaporization and spreading of spilled liquids.  Even though there are several well established evaporation models for calculating the evaporation flux from a pool, the dynamics of the pool spreading and shrinking phases is not well established.  The challenge with these models is due to an intractable solution to the full conservation equations to establish the pool dynamics. Therefore, the problem has been solved by order-of-magnitude estimates of the forces involved; gravity, drag, viscous, and surface tension. Researchers have recognized three different spreading regimes for the expansion of the pool; (i) gravity–inertia, (ii) gravity–viscous, and (iii) viscous–surface tension. The main driving force for the pool spreading phase is gravity, which is dominant in the early stages of pool expansion.

The issues that have not been addressed satisfactorily in the literature are: a) the maximum radius a pool can expand to; b) minimum height it can reach before a homogenous pool breaks up into patches of liquids; and c) the criteria for the shrinking phase of the pool.

In this paper, the shrinking phase of the pool evaporation model for liquid spills on solid surfaces in unconfined settings has been broadly categorized into two approaches: (1) a shrinking radius approach (i.e., shrinking pool area), and (2) a shrinking height approach (i.e., non-shrinking pool area).  Shrinking radius approach, for both instantaneous and continuous spills, allows the pool radius to expand as long as the height of the pool is 1 cm or greater. After the pool depth reaches the height of 1 cm, this constraint is maintained and the radius is allowed to shrink until the liquid is completely evaporated. On the other hand, the shrinking height approach maintains the pool radius as a constant as soon as the pool depth is equal to 1 cm.  From there, the pool height decreases due to evaporative mass losses, while the pool radius remains constant.      

In addition, we try to present arguments on the merit of the shrinking height approach vs. the shrinking radius approach for the shrinking phase of pool evaporation on solid surfaces. The results from the two approaches (shrinking radius and constant height vs. shrinking height and constant radius) are compared for various single and binary components spills of varying boiling point ranges for continuous/instantaneous spill scenarios.  In particular, pool evaporation rates, pool temperature, pool radius, cumulative evaporated amount and total evaporation time are compared for various spill scenarios. Overall, we found that the proposed shrinking height approach methodology gives better prediction than shrinking radius approach for the pool shrinking phase.

Checkout

This paper has an Extended Abstract file available; you must purchase the conference proceedings to access it.

Checkout

Do you already own this?

Pricing

Individuals

AIChE Pro Members $150.00
AIChE Graduate Student Members Free
AIChE Undergraduate Student Members Free
AIChE Explorer Members $225.00
Non-Members $225.00