(401h) Morphological Tuning of Conductive Bismuth-Based Coordination Polymer for Selective CO2 Electroreduction to Formate
AIChE Annual Meeting
2023
2023 AIChE Annual Meeting
Materials Engineering and Sciences Division
Materials for Effective Energy Storage
Thursday, November 9, 2023 - 5:30pm to 5:44pm
Bismuth (Bi) has been demonstrated as an efficient catalyst to drive the conversion of CO2 to formate.5,6 The majority of Bi-based electrocatalysts consisting of dense clusters of Bi flakes or large Bi particles have low utilization of Bi, since only the surface/edge Bi atoms are regarded as accessible and electrochemically active.8 Taking the relatively low natural abundance of Bi into consideration, the electrocatalysts with large Bi clusters are unfavorable. Bi-based coordination polymers and metal-organic frameworks (MOFs) have drawn much attention for electrocatalysis owing to the Bi atom economy and single-atom dispersion. As one of the heterogeneous molecular catalysts, coordination polymers and MOFs incorporate the advantages of homogeneous catalysts and heterogeneous catalysts, not only showing high utility and activity, but also making it able to tune the intrinsic activity and selectivity at molecular level by changing the ligands.9-11 Despite the intrinsic merits of heterogeneous molecular catalysts, the poor electrical conductivity and structural stability impede the application of coordination polymers as electrocatalysts.12 In recent years, studies on Bi-based coordination polymers and MOFs as electrocatalysts have mainly focused on applying them as pre-catalysts to construct Bi metals/metal oxides particles through thermal emission and electroreduction based on the instability of coordination polymer and redox nature of Bi(III).13-16 Constructing conductive coordination polymer with robust nature and employing it as heterogeneous molecular catalyst for CO2 electroreduction shows much promise to advance the knowledge of intrinsic catalytic activity and increase the utilization of metal atoms.
In this work, we employ a two-dimensional (2D) coordination polymer nanosheet where Bi3+ coordinate with 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) ligands for CO2 electroreduction (Figure 1).17 The large Ï-conjugated system and planar geometry enable efficient through-bond charge delocalization of HHTP are beneficial to electron transfer and migration; the robust nature of HHTP enhance the structural stability of Bi-based coordination polymers during the electroreduction process. Moreover, a surfactant-assisted method enables the morphology tuning of coordination polymer for 2D nanosheets and exposure of specific facet. The 2D Bi(HHTP) nanosheets exhibited high selectivity toward formate from CO2 reduction, large current density, desirable mass activity and high turnover frequency in aqueous media. It showed over 80% faradaic efficiency toward formate in near-neutral media at a wide potential range from -0.9 to -1.2 V vs. RHE with no obvious degradation after 10 h of continuous electrolysis. Its mass activity with respect to Bi exceeded 200 A gâ1. Experimental methods including in-situ ATR-SEIRAS and in-situ Raman spectroscopies and DFT calculations were used to figure out the intermediates, clarify the mechanism of CO2 electroreduction to formate, and specify the effects of exposure of facets on electrocatalytic performance of the Bi(HHTP).
References:
[1] Yi, J. D.; Xie, R.; Xie, Z. L.; Chai, G. L.; Liu, T. F.; Chen, R. P.; Huang, Y. B.; Cao, R. Highly Selective CO2 Electroreduction to CH4 by In Situ Generated Cu2O Single-Type Sites on a Conductive MOF: Stabilizing Key Intermediates with Hydrogen Bonding. Angew. Chem. Int. Ed. 2020, 59 (52), 23641-23648.
[2] Zhao, Y.; Zheng, L.; Jiang, D.; Xia, W.; Xu, X.; Yamauchi, Y.; Ge, J.; Tang, J. Nanoengineering Metal-Organic Framework-Based Materials for Use in Electrochemical CO2 Reduction Reactions. Small 2021, 17 (16), e2006590.
[3] Wang, H.; Matios, E.; Wang, C.; Luo, J.; Lu, X.; Hu, X.; Li, W. Rapid and Scalable Synthesis of Cuprous Halide-Derived Copper Nano-Architectures for Selective Electrochemical Reduction of Carbon Dioxide. Nano Lett. 2019, 19 (6), 3925-3932.
[4] Wu, Z.; Wu, H.; Cai, W.; Wen, Z.; Jia, B.; Wang, L.; Jin, W.; Ma, T. Engineering Bismuth-Tin Interface in Bimetallic Aerogel with a 3D Porous Structure for Highly Selective Electrocatalytic CO2 Reduction to HCOOH. Angew. Chem. Int. Ed. 2021, 60 (22), 12554-12559.
[5] Wang, Y.-H.; Jiang, W.-J.; Yao, W.; Liu, Z.-L.; Liu, Z.; Yang, Y.; Gao, L.-Z. Advances in electrochemical reduction of carbon dioxide to formate over bismuth-based catalysts. Rare Metals 2021, 40 (9), 2327-2353.
[6] Guan, Y.; Liu, M.; Rao, X.; Liu, Y.; Zhang, J. Electrochemical reduction of carbon dioxide (CO2): bismuth-based electrocatalysts. J. Mater. Chem. A 2021, 9 (24), 13770-13803.
[7] Han, N., Ding, P., He, L., Li, Y., Li, Y. Promises of Main Group MetalâBased Nanostructured Materials for Electrochemical CO2 Reduction to Formate. Adv. Energy Mater. 2020, 10, 1902338.
[8] Fu, X.; Wang, J. A.; Hu, X.; He, K.; Tu, Q.; Yue, Q.; Kang, Y. Scalable Chemical Interface Confinement Reduction BiOBr to Bismuth Porous Nanosheets for Electroreduction of Carbon Dioxide to Liquid Fuel. Adv. Funct. Mater. 2022, 32 (10), 2107182.
[9] Wang, H.-N.; Meng, X.; Dong, L.-Z.; Chen, Y.; Li, S.-L.; Lan, Y.-Q. Coordination polymer-based conductive materials: ionic conductivity vs. electronic conductivity. J. Mater. Chem. A 2019, 7 (42), 24059-24091.
[10] Hui, S. R.; De Luna, P. How increasing proton and electron conduction benefits electrocatalytic CO2 reduction. Matter 2021, 4 (5), 1555-1577.
[11] Majidi, L.; Ahmadiparidari, A.; Shan, N.; Misal, S. N.; Kumar, K.; Huang, Z.; Rastegar, S.; Hemmat, Z.; Zou, X.; Zapol, P.; et al. 2D Copper Tetrahydroxyquinone Conductive Metal-Organic Framework for Selective CO2 Electrocatalysis at Low Overpotentials. Adv. Mater. 2021, 33 (10), e2004393.
[12] Huang, X.; Gan, L. Y.; Wang, J.; Ali, S.; He, C. C.; Xu, H. Developing Proton-Conductive Metal Coordination Polymer as Highly Efficient Electrocatalyst toward Oxygen Reduction. J. Phys. Chem. Lett. 2021, 12 (38), 9197-9204.
[13] Wang, Z.; Zeng, Z.; Wang, H.; Zeng, G.; Xu, P.; Xiao, R.; Huang, D.; Chen, S.; He, Y.; Zhou, C.; et al. Bismuth-based metalâorganic frameworks and their derivatives: Opportunities and challenges. Coord. Chem. Rev. 2021, 439, 213902.
[14] Li, N.; Yan, P.; Tang, Y.; Wang, J.; Yu, X.-Y.; Wu, H. B. In-situ formation of ligand-stabilized bismuth nanosheets for efficient CO2 conversion. Appl. Catal. B: Environ. 2021, 297, 120481.
[15] Zhang, E.; Wang, T.; Yu, K.; Liu, J.; Chen, W.; Li, A.; Rong, H.; Lin, R.; Ji, S.; Zheng, X.; et al. Bismuth Single Atoms Resulting from Transformation of Metal-Organic Frameworks and Their Use as Electrocatalysts for CO2 Reduction. J Am Chem Soc 2019, 141 (42), 16569-16573.
[16] Yuan, W.-W.; Wu, J.-X.; Zhang, X.-D.; Hou, S.-Z.; Xu, M.; Gu, Z.-Y. In situ transformation of bismuth metalâorganic frameworks for efficient selective electroreduction of CO2 to formate. J. Mater. Chem. A 2020, 8 (46), 24486-24492.
[17] Aykanat, A.; Jones, C. G.; Cline, E.; Stolz, R. M.; Meng, Z.; Nelson, H. M.; Mirica, K. A. Conductive Stimuli-Responsive Coordination Network Linked with Bismuth for Chemiresistive Gas Sensing. ACS Appl. Mater. Interfaces 2021, 13 (50), 60306-60318.