(182g) Biostable Conductive Nanocomposite for Implantable Subdermal Antenna | AIChE

(182g) Biostable Conductive Nanocomposite for Implantable Subdermal Antenna

Authors 

Curry, F. Jr. - Presenter, University of Utah
Current antennas used for communication with implantable medical devices are connected directly to the titanium device enclosure, but these enclosures are shrinking as batteries and circuits become smaller. Due to shrinking device size, a new approach is needed that allows the antenna to extend beyond the battery pack, or to be entirely separate from it. Softer properties are needed for antennas in direct contact with body tissues. This must be achieved without compromising the high electrical conductivities and stabilities required for acceptable performance. Here, a nanocomposite based approach was taken to create soft, biocompatible antennas that can be embedded in the fat layer as an alternative to the metallic antennas used today. The nanocomposite films combine the exceptional electrical conductivity, biocompatibility, and biostability of gold nanoparticles with the mechanical compliance, biocompatibility, and low water permeability of polyurethane. Nanocomposite film synthesis utilized flocculation and vacuum assisted filtration methods. The soft antenna films display high conductivities (~103 – 105 S/m), reduced Young’s Moduli (~102 – 103 MPa), as well as exceptional biocompatibilities and biostabilities characterized by cell growth and accelerated degradation studies. Consequently, the nanocomposite antennas are promising for chronic in vivo performance when the conductivity is above 103 S/m.