Primary tabs

Meet the Faculty Candidate Poster Session
Chair(s):
Madihally, S. V., Oklahoma State University
Co-chair(s):
Voronov, R., New Jersey Institute of Technology NJIT

The "Meet-the-Faculty Candidate" poster session will provide a great opportunity for faculty, recruiters, and Department Chairs to speak directly with current graduate students and postdoctoral researchers who are seeking faculty positions.

Papers:
1:00 PM
(6ak) Quantitative Label-Free Dynamic Phenotyping of Highly Metastatic Cancer Cells for Emerging Liquid Biopsy Applications
1:00 PM
(6ay) Mixed-Metal-Oxide Redox-Catalyst for Shale-Oil and Gas Conversion
1:00 PM
(6br) Environmental Applications of Al/Zr Pillared Clay As Efficient Heterogeneous Catalyst for Catalytic Wet Oxidation of Phenol
1:00 PM
(6fc) Designing Functional Soft Materials Using Anisotropic Fluids
1:00 PM
(6ij) High Performance Polymers for Water Purification and Energy Storage/Generation Applications: Rational Design Guided By Fundamental Structure/Property Relations
1:00 PM
(6el) Metal-Free Organic Molecular Electrocatalysts for Energy Applications
1:00 PM
(6ju) Functional 2D Material Nanoarchitectures for Sustainable Energy Generation
1:00 PM
(6dx) Three-Dimensional Numerical Simulation of Natural Gas/Methanol Dual-Fuel Engine
1:00 PM
(6bm) Bridging Concepts between Electrochemically and Thermally Activated Catalytic Reactions
1:00 PM
(6ep) Control of Slip at the Fluid-Surface Interface Using Molecular Additives
1:00 PM
(6et) Fluid Dynamics at Different Length Scales in Confinements
1:00 PM
(6cr) Data-Driven Modeling in Chemical Engineering and Molecular Science
1:00 PM
(6dp) Design and Development of Materials and Electrolytes for Energy: From Fundamental Mechanisms to Applications
1:00 PM
(6n) Protein Engineering for Cell- and Ligand-Based Immunotherapy
1:00 PM
(6ab) Multiscale Multiphysics Modeling of Blood Clotting and Thrombus Bio-Chemomechanics in the Vasculature
1:00 PM
(6jp) Designing Chemical Reactivity at the Nanoscale using Molecular Simulation
1:00 PM
(6iu) Cell-Free Bioprocess Engineering for a Renewable Carbon Future
1:00 PM
(6ap) Electrochemical Biotechnology
1:00 PM
(6aj) Interstitial Fluid Flow and Transport in Neural Trauma and Disease
1:00 PM
(6w) New Routes Toward Biomass-Derived Carbohydrates Upgrading
1:00 PM
(6ee) Electromagnetic and Chemical Treatment for Efficient Multiphase Petroleum Transportation
1:00 PM
(6cy) Electrocatalysis for Sustainable Energy Storage and Conversion
1:00 PM
(6gp) Design of Functional Nanomaterials for Energy Applications Using Flow Reactors
1:00 PM
(6ca) Catalysis for Sustainability: Probing the Fundamentals of Chemical Conversion Using Synthetic, Kinetic, and Electrocatalytic Approaches
1:00 PM
(6jj) Active Process Control in Pharmaceutical Continuous Manufacturing — the Quality By Control (QbC) Paradigm
1:00 PM
(6dw) Experiment on the Performance of Natural Gas/Methanol Dual-Fuel Engine
1:00 PM
(6hy) Designing Polymers As Molecular Recognition Agents for Diagnostic Biosensing and Imaging
1:00 PM
(6ai) Engineered Hydrogel Biomaterials for Mimicking Tumor Microenvironments and Controlling Cancer Cell Fate
1:00 PM
(6in) Membrane Technology and Bioengineering for Sustainable Products and Processes
1:00 PM
(6fh) Numerical Studies on Granular Flows at Macroscopic and Microscopic Levels Using DEM
1:00 PM
(6do) Advanced Materials and Nanotechnologies for Efficient, Solution Processable Energy Devices
1:00 PM
(6be) Fundamental Understanding of Non-Traditional Feedstock Conversion Processes
1:00 PM
(6by) Synthesis of 5-Hydroxymethylfurfural from Disaccharides Using Niobium-Modified Montmorillonite
1:00 PM
(6ji) Discovery and Development of Biocatalysts for Fine Chemicals Synthesis
1:00 PM
(6bj) Controlled Catalytic Capability through Tailored Nanoporous Materials: For Selective and Sustainable Chemical Processes
1:00 PM
(6iz) Single-Cell Analysis for Advancing Synthetic Biology
1:00 PM
(6av) Engineering Catalytic and Reactive Interfaces for the Sustainable Production of Fuels and Chemicals
1:00 PM
(6ed) Fueling Our Future with Membrane Technology:Clean Energy Conversion and Process Intensification
1:00 PM
(6hh) Effects of Complex Particle Interactions on Fluid-Particle Flows
1:00 PM
(6fp) Using in-Situ X-Ray Analysis Techniques to Understand Materials Synthesis
1:00 PM
(6bc) Optimizing Electrocatalysts for Energy Storage and CO2 Conversion
1:00 PM
(6ev) Research on the Vertical Falling Film Behavior in the Scrubbing-Cooling Tube
1:00 PM
Energy, Sustainability, & the Environment
1:00 PM
(6af) Elastohydrodynamics and Soft Matter Mechanics to Understand Biological Adhesion, Human Touch, and Optics-Free Cytometry
1:00 PM
(6ex) Active Soft Matters and Soft Interfaces
1:00 PM
(6gh) Utilizing Nano- and Micro-Particles for Safe and Efficient Gene and Drug Delivery
1:00 PM
(6ec) Kinetics and Reliability of Thermo-Electro-Chemical Processes for Energy Conversion and Chemical Production
1:00 PM
(6jc) Protein-Protein Hydrodynamics & Thermodynamics in Concentrated Solutions and Therapeutic Protein Stability in Manufacturing-Relevant Flow Fields
1:00 PM
(6cm) Computational Design of Functional Materials and Their Interfaces
1:00 PM
(6fs) Porous, Conductive Crystals: Expanding the 2D Materials Library with Metal-Organic Frameworks (MOFs)

Pages

Topics: 
Career Development
Education
Job Search

Checkout

Paper abstracts are public but to access Extended Abstracts, you must first purchase the conference proceedings.

Checkout

Do you already own this?

Pricing

Individuals

AIChE Members $150.00
AIChE Graduate Student Members Free
AIChE Undergraduate Student Members Free
Non-Members $225.00