(7dr) Multifunctional Soft-Nano Interfaces for Energy, Environment, and Healthcare
AIChE Annual Meeting
Sunday, October 29, 2017 - 1:00pm to 3:30pm
My research interests are in micro/nano fabrication of functional materials, colloids and interfaces of soft nanostructures, self and directed assembly, nano/micro-electronics, microfluidics, 3D printing, photovoltaics, polymer thin-films, carbon nanomaterials, carbon composites, soft elastomers, liquid metals, flexible electronics, stretchable transistors, carbon MEMS/NEMS in security, health, energy and environmental applications.
In addition to research, I would also like to teach Chemical Engineering, Materials Engineering and Physics based on my interdisciplinary academic background and experiences.
Multifunctional Soft-nano Interfaces for Energy, Environment, and Healthcare
Kunal Mondal1,2, Michael D Dickey1, Ashutosh Sharma2, and Jan Genzer1
1Department of Chemical and Biomolecular Engineering, North Carolina State University, 911 Partnerâs Way, Raleigh, NC-27695, USA
2Department of Chemical Engineering, Indian Institute of Technology Kanpur, Uttar Pradesh-208016, India
I would like to help with the countryâs emerging problems in healthcare, agriculture and security sectors to benefit a broad spectrum of society while using minimal resources. Multifunctional nanointerfaces can be used to develop sensor and detection devices such as biosensors, explosives trace detectors, mechanical-stress sensors, wastewater management and energy storage owing to their nanoscopic surface properties. During my doctoral study in Chemical Engineering at Indian Institute of Technology Kanpur, I have performed research on synthesis of various nanostructured materials and their application towards electrochemical biosensing, waste water treatment, Li-ion batteries and supercapacitors. I have used electrospun carbon nanofibers and nanocomposites with metal and metal-oxide nanophase to fabricate sensors for enzymatic detection of cholesterol, breast cancer, food toxin and soil nutrient. Catalytic and photocatalytic properties of those nanostructures were used to degrade industrial and agricultural wastes. The pseudo capacitance of carbon nanomaterials was integrated with metal oxides to store electrochemical energy in supercapacitors and Li-ion batteries. At present in my postdoctoral research here at NC State University, I am focusing on flexible electronics such as soft stretchable transistors, strain and pressure sensors. I have used microfluidic and 3D printing approaches to pattern liquid metal alloy on soft elastomers to create stretchable conducting electrodes. I am also working with Eastman Chemical Company, USA on automotive coating formation and impact resistive coating on glass windshields.
Research Interest: My research interests are in micro/nano fabrication of functional materials, colloids and interfaces of soft nanostructures, self and directed assembly, nano/micro-electronics, microfluidics, 3D printing, photovoltaics, polymer thin-films, carbon nanomaterials, carbon composites, soft elastomers, liquid metals, flexible electronics, stretchable transistors, carbon MEMS/NEMS in security, health, energy and environmental applications.
Teaching Interest: In addition to research, I would also like to teach Chemical Engineering, Materials Engineering and Physics based on my interdisciplinary academic background and experiences.
Soft-nano fabrication; Nao-interface; Chemical engineeringâ Materials Engineering; Materials Physics; Microfluidics; Flexible electronics
1. Mondal, K. et al. Highly sensitive porous carbon and metal/carbon conducting nanofiber based enzymatic biosensors for triglyceride detection. Sens. Actuators B Chem. 246, 202â214 (2017).
2. Ali, M. A., Mondal, K. et al. In situ integration of graphene foamâtitanium nitride based bio-scaffolds and microfluidic structures for soil nutrient sensors. Lab Chip 17, 274â285 (2017).
3. Ali, M. A. Mondal, K. et al. Microfluidic immuno-biochip for detection of breast cancer biomarkers using hierarchical composite of porous graphene and titanium dioxide nanofibers. ACS Appl. Mater. Interfaces 8, 20570â20582 (2016).
4. 11. Mondal, K. et al. Metal-oxide decorated multilayered three-dimensional (3D) porous carbon thin films for supercapacitor electrodes. Ind. Eng. Chem. Res. 55, 12569â12581 (2016).
5. Ali, M. A. Mondal, K. et al. Mesoporous few-layer graphene platform for affinity biosensing application. ACS Appl. Mater. Interfaces 8, 7646â7656 (2016).
6. Mondal, K., Ali, M. A et al. Electrospun functional micro/nanochannels embedded in porous carbon electrodes for microfluidic biosensing. Sens. Actuators B Chem. 229, 82â91 (2016).
7. Ali, M. A., Mondal, K., et al. Anti-epidermal growth factor receptor conjugated mesoporous zinc oxide nanofibers for breast cancer diagnostics. Nanoscale 7, 7234â7245 (2015).
8. Khosla, R. Mondal, K. et al. Effect of electrical stress on Au/Pb (Zr 0.52 Ti 0.48) O3 /TiOxNy /Si gate stack for reliability analysis of ferroelectric field effect transistors. Appl. Phys. Lett. 105, 152907 (2014).
9. Ali, M. A., Mondal, K. et al. A surface functionalized nanoporous titania integrated microfluidic biochip. Nanoscale 6, 13958â13969 (2014).
10. Mondal, K., et al. Highly sensitive biofunctionalized mesoporous electrospun TiO2 nanofiber based interface for biosensing. ACS Appl. Mater. Interfaces 6, 2516â2527 (2014).
11. Singh, P., Mondal, K. & Sharma, A. Reusable electrospun mesoporous ZnO nanofiber mats for photocatalytic degradation of polycyclic aromatic hydrocarbon dyes in wastewater. J. Colloid Interface Sci. 394, 208â215 (2013).