Poster Session: Materials Engineering & Sciences

Chair(s):
Stretz, H. A., Tennessee Technological University
Co-chair(s):
Olsen, B. D., Massachusetts Institute of Technology
Liu, D., University of Maryland
Zhang, J., University of Minnesota

This is the general poster session for the Materials Engineering & Sciences Division. Posters in all areas of the division are invited.

Papers:
6:00 PM
(217ap) Nonlinear Dynamics and Hopf Bifurcation in Controlled/"Living" Radical Polymerization of Styrene
6:00 PM
(217dj) Enzymatic Synthesis of Conducting Polymer-Nanocarbon Composites For Supercapacitor-Electrode Materials
6:00 PM
(217bw) Characterization of Monomer Miniemulsion Stability
6:00 PM
(217dq) Thermogravimetric Analysis For Wood Fiber Reinforced Polypropylene Base Composites
6:00 PM
(217fm) Isothermal Water Splitting Using The Two-Step Redox “Hercynite Cycle”
6:00 PM
(217fo) Simulation Study On the Preparation and Application of High-Purity Monosilane
6:00 PM
(217az) Injectable, Thermoresponsive Hydrogels With Tunable Cross-Linking Kinetics Based On Ketone and Aldehyde-Functionalized Pre-Polymers
6:00 PM
(217dy) Manipulating Lignin Solubility
6:00 PM
(217cu) The Effects of Protein Deposition and Shear On Polymer Micelle Morphology and Stability
6:00 PM
(217ed) Preparation and Characterization of Polyaniline Intercalated Graphene Nanopaper Composite
6:00 PM
(217bf) Vinyl Ester Resin: Rheological Behaviors, Curing Kinetics, Thermo-Mechanical and Tensile Properties
6:00 PM
(217bp) Pgs/PLLA Fibers Scaffolds By Core/Shell Electrospinning
6:00 PM
(217cy) Development of Nanoparticle-Stacked Membranes Fabricated By Using Functionalized Silver Nanoparticles
6:00 PM
(217aa) Enhancing the Rheological Properties of Main-Chain Liquid Crystalline Polymers for Film Coextrusion
6:00 PM
(217eo) Kinetics of Step-Growth Polymerization of Glycerol Into Polyglycerol Using H2SO4 As Catalyst
6:00 PM
(217ab) Conformations, Shapes, and Viscoelastic Properties of 1, 4 Polybutadiene Using a Rotational Isomeric State Approach
6:00 PM
(217ae) Rheology & Thermal Stability of Ethoxylated Surfactants and Polymers Systems Used for Enhanced Oil Recovery in Carbonate Reservoirs
6:00 PM
(217dg) Statistical Thermodynamics of Irreversible Gelation
6:00 PM
(217f) Preparation of Covalently Colored Polymer Latex Based On a New Polymerizable Anthraquinone Dye
6:00 PM
(217ai) Validation of Micro-Reaction Technology for Polymerization Processes
6:00 PM
(217dc) Adaptive Origami Structures and Their Mechanical Properties
6:00 PM
(217am) Grafting of Maleic Anhydride Onto Natural Rubber Via Free Radical Initiation in Supercritical Carbon Dioxide
6:00 PM
(217df) Engineering Large Self-Assembled Amyloid Fibers As Robust Biomaterials
6:00 PM
(217bu) A New Strategy for the Photopolymerization of Heterocyclic and Polar Monomers
6:00 PM
(217dn) Template-Free Synthesis of TiO2 Microcages With Improved Photocatalytic Activity
6:00 PM
(217by) Highly Propylene-Selective Supported Zeolitic-Imidasolate Framework (ZIF-8) Membranes By Rapid Microwave-Assisted Seeding and Subsequent Secondary Growth
6:00 PM
(217dt) Phase Separation Kinetics in Block Copolymer Based Pressure Sensitive Adhesives
6:00 PM
(217ax) Effects of Ionic Groups On the Assembly of Polymer-Grafted Nanoparticles
6:00 PM
(217q) Long Chain Branching in Polyethylene By UV Irradiation
6:00 PM
(217fn) Determining the Reactivity of Low and High Carbon Fly Ashes for Application in Geopolymer Concrete
6:00 PM
(217ea) Study On the Attenuation of Ca-Based Sorbents Cyclic Carbonatation Rate
6:00 PM
(217ch) Preparation and Characterization of Carbon-Coated Silicon Nano-Composites As Anodes for Lithium-Ion Batteries
6:00 PM
(217w) Effect of Stearic Acid-Grafted Starch On Processability and Properties of Polyethylene/Thermoplastic Starch Blends
6:00 PM
(217cl) Multifunctional Epoxy Nanocomposites With Various Shape of Nanofillers
6:00 PM
(217ei) Controlled Release Inorganic Gel for Air and Surface Disinfections
6:00 PM
(217bm) Characterizing Interfacial Interactions in Li-Ion Batteries
6:00 PM
(217em) Synthesis and Effect of Fuel of Sr Doped CaTiO3 Using By Solution Combustion Synthesis (SCS)
6:00 PM
(217cp) Synthesis of Pnipam Microparticles With Novel Fiber Packed Reactor for Use in Hydrogels
6:00 PM
(217ev) Synthesis of Thermo-Responsive Polymer/Ferrite Composite for Heavy Metal Ion Recovery
6:00 PM
(217fa) The Preparation of Well-Dispersed White Carbon Black (hydrated silica) From Coal Gangue Via a Carbonation Method
6:00 PM
(217ff) Concentration Profile of Oscillation Annealed PCBM in P3HT Films
6:00 PM
(217da) Crystallographic Changes in Lead Zirconate Titanate Due to High Neutron Radiation Exposure
6:00 PM
(217b) Heat Resistance Effect of CaSO4 Whiskers to PVC Composites
6:00 PM
(217aq) Sucrose Ester/ Poly(lactic acid) Nanocomposites for Food Packaging Application: Fabrication and Characterization
6:00 PM
(217l) Rheological Characterization of Commercial Alginate Solutions With High Viscosity and Its Effect in the Production of Microparticles
6:00 PM
(217at) Rheological Properties of Thermoviscosifying Polymers in High-Temperature High-Salinity Environment
6:00 PM
(217dr) Effects of Extensional Flow and Nanoparticle Stabilization On the Morphology of PS/LLDPE Blends
6:00 PM
(217d) An Amphiphilic Polysulfone-Graft-Poly(ethylene) Glycol Random Copolymer for Alkaline Exchange Membrane Fuel Cells
6:00 PM
(217o) Kinetics of Free-Radical Crosslinking Polymerization: A Comparative Experimental and Numerical Study
6:00 PM
(217cd) Evaluation of the Characteristics of Chitosan-Xanthan Films in Comparison to Those of Other Chitosan-Polymer Complexes Focusing the Application As Wound Dressings

Pages

Topics: 
Materials

Checkout

Paper abstracts are public but to access Extended Abstracts, you must first purchase the conference proceedings.

Checkout

Do you already own this?

Pricing

Individuals

AIChE Members $150.00
AIChE Graduate Student Members Free
AIChE Undergraduate Student Members Free
Non-Members $225.00