(415b) The Phase Behavior and the Flory–Huggins Interaction Parameter of Blends Containing Amorphous Poly(resorcinol phthalate- block-carbonate), Poly(bisphenol-A carbonate) and Poly(ethylene terephthalate)

The phase behavior of the blends of poly(ethylene terephthalate) (PET) and poly(Resorcinol Phthalate-block-Carbonate) (RPC) and the blends of PET and poly(Bisphenol-A Carbonate) (PC) was investigated by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM). Blends of high molecular weight PET and RPC copolymer with 20 mol% resorcinol phthalate (RPC20) showed two glass transition temperatures in DMA and DSC but the cold crystallization rate of PET phase was substantially lowered as compared to neat PET, indicating partial miscibility at all compositions. The RPC20 with M_w = 31,500 g/mol formed miscible blends with PET when PET has weight-average molecular weight <9500 g/mol. The Flory–Huggins interaction parameter between PET and RPC20 was calculated to be 0.029 ± 0.003 by using the Flory–Huggins equation at critical composition and molecular weight. PC with M_w = 30,000 g/mol formed miscible blends with PET only when PET had molecular weight <2800 g/mol, indicating PC/PET blends were much less miscible than RPC20/PET blends. Group contribution methods agreed well with the experimental results obtained both in the present study and a previous study [1], predicting that the addition of a resorcinol phthalate block to a PC backbone should increase the miscibility of PC and PET.