Commitment to Process Safety

The Cornerstone of process safety excellence. A workforce that is actively involved and an organization that fully supports process safety as a core value will tend to do the right things in the right ways at the right times-even when no one else is looking.

OSHA Chemical NEP Panel Discussion

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 23, 2010
This presentation will provide additional time for the session speakers to discuss additional aspects of the OSHA Chemical National Emphasis Program...

A Framework for Human Error Analysis of Emergency Situations

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 23, 2010
Human factors play an important role in the escape, evacuation and rescue process. Human factors analysis is rooted in the concept that the frequency...

OSHA Refinery and Chemical NEP Findings

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 23, 2010
Since 2007, OSHA has initiated two major National Emphasis Programs (NEPs) in process safety. The Petroleum Refinery Process Safety Management NEP (...

Elements of Human Factors Missing from Process Safety

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 23, 2010
Process safety is about controlling risk of failures and errors; controlling risk is primarily about reducing the risk of human error. All elements...

Preparing for the Chemical NEP

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 23, 2010
On July 27, 2009, OSHA issued a National Emphasis Program for the chemical industry (“the Chemical NEP”). Pursuant to the Chemical NEP, OSHA will...

Journey towards PSM Excellence

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
This paper describes the experience, learning and major challenges in implementing Process Safety Management at Reliance Industries Limited (RIL)...

How to Evaluate Process Safety Culture

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
At first glance it may seem that organizational culture is subjective and therefore difficult to measure. Indeed, even the definition of culture...

Stability Analysis of Safety Valve

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
The stability for a safety valve was investigated by experiments and analysis. It was found that the dynamic instability was caused by the...

Process Safety in the Face of Significant Change

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
Development of an effective process safety culture requires employees to look beyond intended performance, to their own nonconscious assumptions...

Process Safety Management in the Energy Sector

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 22, 2010
This paper describes experience of application of the principles of process safety management within Centrica plc, an integrated energy company with...

Overview of Risk Based Process Safety

Public (classroom) Course
Special 1-day Version Special 1-day version of this course is being offered at the 4th CCPS Global Summit on Process Safety. For more information,...

OSHA Process Safety Management Review

eLearning (online) Course
Take this fundamental course and gain an introduction to Process Safety Management. In just two short hours, you’ll learn how and when to apply the...

Process Safety Boot Camp

Public (classroom) Course
Offered in North America, this intensive and highly interactive 4-day course trains chemical engineers in the fundamentals of Process Safety. Taught...

Sponsored Webinar: Making Your HAZOP Study Work for You…In Real Time

Archived Webinar
May 3, 2017
Too often, a HAZOP study, despite the investment of human and financial capital, becomes a stand-alone document, securely archived for regulatory purposes. Many disparate processes or in fact even a lack of processes, related to study follow-up activities may not give you the insight you need into...

Guidelines for Combustible Dust Hazard Analysis

May, 2017
This book describes how to conduct Process Hazard Assessments (PHAs) for processes handling combustible solids. The book explains how to do a dust hazard assessment by using either an approach based on compliance with existing consensus standards, or by using a risk based approach. Worked examples...

Ten Years of Living Risk Based Process Safety

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 29, 2017
Ten Years of Living Risk Based Process Safety CCPS published Guidelines for Risk Based Process Safety in March 20007. We were the primary authors of...

The Facility Siting Cycle (Revalidation)

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 28, 2017
Facility siting is an assessment of occupied buildings given potential explosion, fire, and toxic hazards. As stated in 29 CFR Part 1910, it is...

Human Error. a Myth Eclipsing Real Causes

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 27, 2017
Abstract Human Error. A myth eclipsing real causes For years the professionals involved in the investigation of industrial accidents have identified...

Major Accidents: Managing the First 96 Hours

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
March 27, 2017
Effectively responding to a major accident requires a prompt, sure-footed approach; especially with criminal prosecutions for endangerment and...

Foundations of Process Safety

Public (classroom) Course
Offered outside of North America, this intensive and highly interactive 4-day course trains chemical engineers in the fundamentals of process safety...

Sponsored Webinar: The Importance of Operating Procedures

Archived Webinar
Feb 22, 2017
Could your facility be under-utilizing your operating procedures? Find out how to use them beyond day-to-day operations. This 60-minute sponsored webinar starts off by looking at why operating procedures are essential to your safety and efficiency, OSHA requirements related to their content and...

Sponsored Webinar: Managing the Lifecycle of Independent Protection Layers

Archived Webinar
Oct 26, 2016
Learn how managing the entire lifecycle of Independent Protection Layers will ensure effectiveness, auditability and independence. This Provenance Consulting-sponsored webinar reviews the current standards and industry practices for IPL management and how to assess the effectiveness of their...

Sponsored Webinar: Quantitative Risk Analysis: Beyond QRA

Archived Webinar
Sep 14, 2016
You understand QRA. Now take the next step in risk mitigation with facility siting. This 60-minute ioMosaic-sponsored webinar begins with a re-cap of the basic concepts involved in QRA and why and how the results such analysis can generate are significant. You’ll gain an appreciation of how QR and...

Sponsored Webinar: Combustible Dust - What you should know about NFPA 652

Archived Webinar
Mar 23, 2016
In this ioKinetic sponsored webinar, you’ll gain an overview of NFPA 652 and how it provides basic principles and minimum requirements to manage fire, flash fire, and explosion hazards of combustible dusts. We’ll compare and contrast NFPA 652 with the legacy NFPA standards—including NFPA 654, 61,...

Black Swans in the Chemical Processing Industries

Archived Webinar
Mar 16, 2016
Catastrophic events continue to happen in the chemical processing industries. Learn how to protect yourself against “black swan” occurrences. This webinar presents examples of black swan events while discussing the difficulties of predicting them. You’ll learn that once black swan events occur,...

Sponsored Webinar: How PSM Programs of the Past Should Shape a Better PSM Future

Archived Webinar
Oct 28, 2015
Process Safety Management has been the “law of the land” in the U.S. for over 20 years, and while it may be perceived differently by different parts of your organization, one aspect is almost universally agreed on: If we had to do it over again, we would approach implementation and practice of PSM...

Sponsored Webinar: Benefits of Intelligent Drawing Practices

Archived Webinar
Jul 29, 2015
This presentation details how to identify opportunities for improved drawing practices and how these practices can shape your facility’s ability to maintain and evaluate Process Safety Information (PSI). Hundreds of thousands of PSI data points are stored on various types of drawings at a given...

Engineering Adventures from Outer Space To Patient Safety And Then Some

Archived Webinar
May 28, 2015
Dr. James P. Bagian will share some of his career experiences, from his diverse "jobs" as astronaut, engineer, doctor, and patient-oriented healthcare delivery expert. Dr. Bagian is a physician and engineer who currently serves as the Director of the Center for Healthcare Engineering and Patient...

Sponsored Webinar: Management of Organizational Change

Archived Webinar
Sep 17, 2014
In this webinar, Dr. Hoff shares some of the results of his current research on the topic of Management of Organizational Change (MOOC). Changes in job responsibilities, loss of key personnel, or even changes in shift hours can lead to serious incidents with potentially severe consequences. In most...

Sponsored Webinar: Has PSI Become a Data Management Nightmare?

Archived Webinar
Mar 26, 2014
This webinar addresses the importance of Process Safety Information (PSI) and PSI management, the potential limitations associated with PSI management within an organization, and real-world solutions for overcoming these limitations to build a robust PSI management program.

Safety in the LNG Value Chain

Archived Webinar
Dec 12, 2012
In this webinar, presenters describe and examine potential LNG (liquefied natural gas) hazards and risk-reduction methods for the LNG value chain ― production and consumption.

Pages

Subscribe to Commitment to Process Safety