(250d) Effects of Shear and Extensional Rheology on Liquid Transfer between Two Flat Surfaces | AIChE

(250d) Effects of Shear and Extensional Rheology on Liquid Transfer between Two Flat Surfaces


Kumar, S. - Presenter, University of Minnesota-Twin Cities
Carvalho, M. S., Pontificia Universidade Catolica do Rio de Janeiro
Wu, J. T., University of Minnesota
Liquid bridges with moving contact lines play a central role in several industrial applications and natural phenomena. In printing processes, liquid bridges undergo significant extension so that liquid can be transferred from one surface to another. In addition, shear deformation arises as the contact lines move along the surfaces. Although the liquids involved often exhibit non-Newtonian rheology, the influence of rheology on liquid transfer is not well understood. To address this issue, flow visualization experiments complemented with numerical simulations are used to determine the role of shear and extensional rheology in liquid transfer between two vertically separating flat surfaces. Shear thinning is found to enhance liquid transfer to the more-wettable surface compared to the Newtonian case at the same capillary number, Ca, where Ca is defined based on the zero-shear viscosity and plate separation speed. This enhancement increases with stronger shear-thinning effects and allows nearly complete transfer for values of Ca > O(10-1) with a sufficiently large surface-wettability difference. The underlying mechanism involves reduced viscosities near the contact line on the less-wettable surface, which allow that contact line to slip more. For strain-hardening liquids, the evolution of the contact radius on the less-wettable surface exhibits two distinct stages during bridge stretching. In the first stage, the contact radius decreases and contact-line motion is primarily governed by shear rheology. In the second stage, a thin liquid thread is formed and the contact radius changes only weakly. During the second stage, extensional rheology dominates and strain hardening stabilizes the thin thread. This extends the breakup time, but has little effect on contact-line motion and the amount of liquid transferred.