Petrochemicals

Design Challenges in Tankage Modernization

AIChE Spring Meeting and Global Congress on Process Safety
Apr 4, 2012
In order to comply with regulation requirements, a refinery needs to perform major revamps to produce different grades of Diesel, namely ULSD, Off-...

Refining Energy Utilization and CO2 Emissions Modeling

AIChE Spring Meeting and Global Congress on Process Safety
Apr 3, 2012
The U.S. petroleum refining sector consumes large quantities of energy in order to convert crude oil into transportation fuels and other products...

Modeling of LNG Spills Into Trenches and Troughs

AIChE Spring Meeting and Global Congress on Process Safety
Apr 5, 2012
Trenches and troughs are commonly used in LNG storage and transfer facilities to contain potential LNG spills. The trenches are concrete-lined...

Hydroprocessing Design - Tutorial

AIChE Spring Meeting and Global Congress on Process Safety
Apr 4, 2012
Hydroprocessing or hydrotreating is the key technology to clean, to refine, and to convert crude oils into valuable products, such as gasoline and...

Cost Effectiveness of 2-Row Membrane System for FLNG

AIChE Spring Meeting and Global Congress on Process Safety
Apr 3, 2012
One of the most critical issues in engineering and design of FLNG is to reduce top side weight along with its load distribution to the sub-structure...

Fate of Ammonia in Refinery Amine Systems

AIChE Spring Meeting and Global Congress on Process Safety
Apr 2, 2012
Fate of Ammonia in Refinery Amine Systems Ralph H. Weiland, Nathan A. Hatcher & R. Scott Alvis Optimized Gas Treating, Inc. Sugar Land, TX...

Waste Heat Recovery Considerations in LNG Plants

AIChE Spring Meeting and Global Congress on Process Safety
Apr 2, 2012
WASTE HEAT RECOVERY CONSIDERATIONS IN LNG PLANTS ABSTRACT DOUGLAS WILES, RYAN HOLLENBACH & STANLEY KWAN Thermal integration in an LNG plant...

Tutorial: The Chemistry of Refinery Fouling

AIChE Spring Meeting and Global Congress on Process Safety
Apr 2, 2012
The chemistry of refinery fouling is well enough understood to mitigate nearly all fouling. The key information required are the location of the...

Process Automation During Refinery Unit Transitions

AIChE Spring Meeting and Global Congress on Process Safety
Mar 15, 2011
Process Automation ideas and technologies have been used sporadically for decades. However, in US refineries, automation technologies are still...

Multi-Model MPC for a Complex pH Neutralization Process

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
Control of feed pH control is an important task in chemical industries, wastewater treatment, polymerization reactions, fatty acid production and...

New Continuous Coking Process

AIChE Spring Meeting and Global Congress on Process Safety
Mar 14, 2011
NEW CONTINUOUS COKING PROCESS A new coking process can accept resid feed from the conventional resid heater in a coking plant and continuously...

Processing Heavy Crudes In Existing Refineries

AIChE Spring Meeting and Global Congress on Process Safety
Mar 13, 2011
Increasing amounts of heavy crudes are being produced, particularly in Canada and South America. The discount prices for these crudes, relative to...

Variability, Inventory Uncertainty and Supply Chains

AIChE Spring Meeting and Global Congress on Process Safety
Mar 22, 2010
This session will develop a fundamental understanding of how cycle time variation in stages of a supply chain propagates into measures of overall...

Successful Energy Stewardship

AIChE Spring Meeting and Global Congress on Process Safety
Mar 22, 2010
An energy stewardship program, aimed at driving energy efficiencies from no-cost operational improvements has been implemented with considerable...

Applied Hydroaeromechanics in Oil and Gas Drilling

October, 2009
An all-in-one reference combining hydrodynamic theory with drilling applications for the design, planning, and optimization of drilling operations Hydromechanical processes underlie the majority of technology operations in drilling and present a crucial concern as the pace and depth of drilling...

Oxygen/Combustible Safeguards in Low Nox Fired Heaters

AIChE Spring Meeting and Global Congress on Process Safety
Mar 22, 2010
Refineries have been installing low NOx equipment on their fired heaters in response to tighter environmental regulation. Low NOx burners minimize...

Environmental Law and Regulation 101

AIChE Spring Meeting and Global Congress on Process Safety
Mar 21, 2010
This presentation will provide a summary of each of the primary environmental regulatory programs, including air, water, waste and emergency planning...
Subscribe to Petrochemicals