AIChE

Unit Operations for Smart Nanomanufacturing

AIChE Annual Meeting
Nov 8, 2010
There is a chasm between promising nanotechnological advances in the laboratory and commercial manufacturing. Many techniques have been developed to...

Evolving Biological Engineering

AIChE Annual Meeting
Nov 8, 2010
In 2010, SBE awarded the James E. Bailey Award, endowed by Cytos Biotechnology, to Dr. Harvey Blanch of the University of California - Berkeley, for...

Introduction and Objectives of the Session

AIChE Annual Meeting
Nov 8, 2010
This session will examine plant, company and industry roles in energy, sustainability, environment, EH&S and economic performance across several...

Fouling Mitigation of Quench Tower System

AIChE Spring Meeting and Global Congress on Process Safety
Mar 24, 2010
Gas cracking plants are especially sensitive to fouling in the quench water section. One main fouling mechanism in the quench tower and in the...

Designing for an LNG Loading Arm Failure

AIChE Spring Meeting and Global Congress on Process Safety
Mar 24, 2010
Over the last few decades, LNG has vaulted onto the world stage as a viable candidate for future energy needs. Scores of studies have been done to...

“Compression System Check Valve Failure Hazards”

AIChE Spring Meeting and Global Congress on Process Safety
Mar 24, 2010
Catastrophic equipment failure due to overpressure can potentially occur in the event of compression system discharge, interstage, and/or suction...

Full Potential Conversion of Vacuum Resids

AIChE Spring Meeting and Global Congress on Process Safety
Mar 23, 2010
Present vacuum resid conversion processes, either coking or hydroconversion, are far from achieving their maximum conversion. With the remaining...

Furnace Safe Park DCS Tool

AIChE Spring Meeting and Global Congress on Process Safety
Mar 23, 2010
Properly managing the shutdown or “safe parking” of multiple steam-cracking furnaces during a plant-wide upset can be challenging. Alarm flood and...

Fuel Performance Parameters for Marine Engines

AIChE Spring Meeting and Global Congress on Process Safety
Mar 23, 2010
The regulations for sulfur reduction in marine fuels are impacting the whole spectrum beginning from the production of the fuel in the refineries to...

Integrated Refinery Cracker, the New Paradigm

AIChE Spring Meeting and Global Congress on Process Safety
Mar 23, 2010
The new trends in crackers are higher capacity and heavier feedstock. This makes the integration between refineries and crackers significantly more...

Feedstock Contaminants: A Case Study

AIChE Spring Meeting and Global Congress on Process Safety
Mar 23, 2010
An advanced characterization program was designed and implemented to identify the chemical nature of contaminants present in the feed to a flexi-...

Options for Mercury Removal in Ethylene Plants

AIChE Spring Meeting and Global Congress on Process Safety
Mar 23, 2010
Ethylene producers have faced the challenge of feedstock contaminants for decades. However, with current industry transitions and surplus capacity,...

Technologies for Enhancing Refinery Gas Value

AIChE Spring Meeting and Global Congress on Process Safety
Mar 23, 2010
The trend of processing heavy and sour crude is resulting in 'fuel long' refineries which seek to export energy in the form of refinery fuel gas or...
Subscribe to AIChE