Browse Issue Articles in this Issue A combined computational fluid dynamics (CFD) and experimental approach to quantify the adhesion force of bacterial cells attached to a plane surface A general dynamic model for multiphase electrolytic systems A second - order moment method applied to gas - solid risers Buoyancy effect on the ultrafiltration of PEG 10,000. Visualization by digital holographic interferometry CFD modeling of single - phase flow in a packed bed with MRI validation Characteristic time scales for predicting the scalar flux at a free surface in turbulent open - channel flows Control of particle cohesion with a polymer coating and temperature adjustment Data - based linear Gaussian state - space model for dynamic process monitoring DEM - simulation of the magnetic field enhanced cake filtration Direct numerical simulation of the turbulent flow in a baffled tank driven by a Rushton turbine Dynamic effects in capillary pressure relationships for two - phase flow in porous media: Experiments and numerical analyses Experimental study of the role of the Weber and capillary numbers on Mesler entrainment Experimental study on the heating effects of microwave discharge caused by metals Flow regime maps and optimization thereby of hydrodynamic cavitation reactors Heat - integrated distillation columns: Vapor recompression or internal heat integration? Impact of process parameters on critical performance attributes of a continuous blender-A DEM - based study Interface sensor based on computer vision: Fine tuning using a fluidized bed Large - scale optimization strategies for pressure swing adsorption cycle synthesis Letter to the Editor Letter to the Editor Moisture content distribution in semibatch drying processes, part II. Falling particle drying rate Moisture content distribution in semibatch drying processes. I. Constant particle drying rate On separation efficiency Optimum design of reverse osmosis systems for hydrogen peroxide ultrapurification Permeability mapping in naturally heterogeneous sandstone cores by magnetization prepared centric - scan sprite Population balance modeling and simulation of liquid - liquid - liquid phase transfer catalyzed synthesis of mandelic acid from benzaldehyde Prediction of TMCH thermal hazard with various calorimetric tests by green thermal analysis technology Predictive Control in Process Engineering-From the Basics to the Applications By R. Haber, R. Bars and U. Schmitz Regularization of inverse problems to determine transcription factor profiles from fluorescent reporter systems Reply to the Letter to the Editor Reply to the Letter to the Editor Secondary nucleation of Aβ fibrils on liposome membrane Silica - based iminodiacetic acid functionalized adsorbent for Ni hydrometallurgical extraction of nickeliferous laterite Symmetry breaking during morphogenesis in the embryo and in engineered tissues Time evolution of the PSD in crystallization operations: An analytical solution based on Ornstein - Uhlenbeck process
