Synthesis and Characterization of Trimetallic Ni(Co)-Mo-W
HDS Catalysts Supported on Al-HMS Substrates
R. Huirache-Acuña1, B. Pawelec2, E.M. Rivera-Muñoz3, R. Nava4
B. Torres5,G. Alonso-Núñez6, J.A. Cortés1 and J.L.G. Fierro2
1Facultad de Ingeniería Química, Universidad Michoacana de San Nicolás de Hidalgo, Ciudad Universitaria, 58060, Morelia, Michoacán, Mexico.
2Instituto de Catálisis y Petroleoquímica, CSIC, c/ Marie Curie, 2, Cantoblanco, 28049 Madrid, Spain. 3Centro de Física Aplicada y Tecnología Avanzada, Universidad Nacional Autónoma de México, A.P. 1-1010, 76000. Querétaro, Qro., Mexico.
4Facultad de Ingeniería, Universidad Autónoma de Querétaro, Centro Universitario, Cerro de las campanas, 76010, Querétaro, Mexico.
5University of Texas at El Paso, Materials Research Technology Institute, El Paso, TX ,79968, USA.
6Centro de Nanociencias y Nanotecnología, UNAM, Ensenada, B. C., 22800, Mexico.
Traditionally, the removal of sulfur from petroleum-derived feedstocks has been achieved by a hydrodesulfurization (HDS) process using alumina-supported Mo or W catalysts promoted by Co or Ni. However, to satisfy new stringent environmental restrictions on the sulfur content of fuels , more active HDS catalysts are being requested by the industry. The new generations of catalysts, such as NEBULA®, which are based on totally different concept of bulk-like materials  are more expensive than alumina-supported ones. Thus, the challenge is to design novel cost-effective and active supported catalysts.
Many different approaches have been taken to achieve this goal, including varying the catalyst support and catalyst synthesis methods. Considering the new supports, recently, the use of mesoporous silica materials for supporting hydrotreating catalysts has attracted interest of the research community [3-11]. In particular, the use of hexagonal mesoporous molecular sieves such as HMS and SBA-15 are intensively studied [3-9,11,12] because of their hexagonal array of uniform mesopores, a narrow pore size distribution, high surface area, high sorption capacity and thermal stability. In addition, the former could be improved by support modification with different cations such as Al, Ti, Zr .
To the best our knowledge there are no references in the literature about the use of the Al-HMS material for supporting trimetallic Co(Ni)MoW catalysts. All investigations are on the monometallic [4, 5] or bimetallic catalysts [3, 6-9]. In order to clarify the effect of promoter (Co vs Ni) on the HDS activity of ternary systems, the Al-HMS supported catalysts were synthesized by simultaneous impregnation. Prior to the catalytic test, the catalytic materials were sulfided ex situ at atmospheric pressure in a tubular furnace heated up 673 K under a flow of H2S in hydrogen (15%) and kept under those conditions for 4 h. The sulfided catalysts were tested in the HDS of dibenzothiophene (DBT) performed in a batch reactor at 623 K and total pressure of 3.1 MPa. The calcined and fresh sulfide catalysts were characterized by a variety of techniques (N2 adsorption–desorption isotherms, XRD, DRS UV–vis spectroscopy and HRTEM).
Keywords: HDS, Catalysts, Trimetallic.
 Final Report by the European Commission on the Revision of Directive 98/70/EC.
 F.L. Plantenga, R.G. Leliveld, Appl. Catal. A: Gen. 248 (2003) 1.
 T. Halachev, J.A. de los Reyes, C. Araujo, G. Cordoba, L. Dimitrov, in B. Delmon, G.F. Froment, P. Grange (Eds.), Hydrotreatment and Hydrocracking of Oil Fractions, Stud. Surf. Sci. Catal. 127 (1999) 401.
 T. Chiranjeevi, P. Kumar, M.S. Rana, S.K. Maity, G. Murali Dhar, T.S.R. Prasada Rao, Microporous Mesoporous Mater. 44-45 (2001) 547-556.
 T. Chiranjeevi, P. Kumar, M.S. Rana, G. Murali Dhar, T.S.R. Prasada Rao, J. Mol. Catal. A: Chem. 181 (2002) 109-117.
 T.A. Zepeda, B. Pawelec, J.L.G. Fierro, A. Olivas, S. Fuentes, T. Halachev, Microporous Mesoporous Mater. 111 (2008) 157-170.
 J. Ramírez, R. Conteras, P. Castillo, T. Klimova, R. Zárate, R. Luna, Appl. Catal. A: Gen. 197 (2000) 69-78.
 B. Pawelec, S. Damyanova, R. Mariscal, J.L.G. Fierro, I. Sobrados, J. Sanz, L. Petrov, J. Catal. 223 (2004) 86-97.
 R. Huirache-Acuña, B. Pawelec, E. Rivera-Muñoz, R. Nava, J. Espino and J.L.G. Fierro, Applied Catalysis B: Environmental, Vol. 92 Issues 1-2 (2009) 168-184.
Would you like to access this content?
No problem. You just have to complete the following steps.
You have completed 0 of 2 steps.
You must be logged in to view this content. Log in now.
Purchase Technical Presentation
You must purchase this technical presentation using one of the options below.
If you already purchased this content recently, please click here to refresh the system's record of ownerships.
|Credits||0.5 Use credits|
|List Price||$25.00 Buy now|
|AIChE Members||$15.00 Buy now|
|AIChE Fuels and Petrochemicals Division Members||Free Free access|
|AIChE Undergraduate Student Members||Free Free access|
|AIChE Graduate Student Members||$15.00 Buy now|