Conference Presentations - 2012 AIChE Spring Meeting and Global Congress on Process Safety

Furnace Stories

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Thursday, April 5, 2012 - 12:00am
The cracking furnace is the heart of the ethylene plant, consuming the most energy, adding the most value and with the potential to cause the most...

Hydrotreating of Biooils to Jet Fuels: An Overview

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Wednesday, April 4, 2012 - 12:00am
This paper will give an overview of the current status of jet fuels production from hydrotreating of biooils, including vegetable oils and microalgae...

Hydroprocessing Design - Tutorial

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Wednesday, April 4, 2012 - 12:00am
Hydroprocessing or hydrotreating is the key technology to clean, to refine, and to convert crude oils into valuable products, such as gasoline and...

Appropriate Placement of Compressors and Expanders

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Wednesday, April 4, 2012 - 12:00am
The term “Appropriate Placement” was introduced in Pinch Analysis during the 1980s to indicate how special unit operations should be correctly...

Turnaround Excellence - Key Success Factors

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Wednesday, April 4, 2012 - 12:00am
Turnaround Excellence is more than a state of being… it is a journey. Achieving and sustaining excellence is wholly dependent on a site approach of...

Capital Cost Targeting of Total Site Heat Recovery

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Wednesday, April 4, 2012 - 12:00am
Heat recovery on Total Site level can provide a considerably high potential for energy saving. It offers additional degrees of freedom for heat...

Dynamic Simulation: Value During LNG Process Design and Beyond

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Wednesday, April 4, 2012 - 12:00am
A contributor to complex/large project management difficulty is uncertainty gaps – gaps between the information required and that readily available...

Pages