Search form

Process Safety

Featured

Process Safety Boot Camp

Instructor-led (classroom) Course
This intensive 4-day course is also offered periodically throughout the year to the broader chemical engineering public. Taught jointly by process safety veterans with decades of experience at major companies from the process industries, the course is highly interactive.

Center for Chemical Process Safety (CCPS)

CCPS was established in 1985 to focus on engineering and management practices that can prevent and mitigate catastrophic accidents involving release of hazardous materials. CCPS is supported by sponsors in the chemical and hydrocarbon process industries and active worldwide via conferences, books, databases, education, research, and more.

Explore related resources below or:

Wind Flow and Vapor Cloud Dispersion at Industrial and Urban Sites

April, 2002
A key component of risk reduction is reducing the potential consequences that could result from toxic or flammable releases. The science of vapor cloud dispersion has advanced significantly in recent years, but one of the long-standing challenges has been in accounting for dispersion around...

Layer of Protection Analysis: Simplified Process Risk Assessment

October, 2001
Layer of protection analysis (LOPA) is a recently developed, simplified method of risk assessment that provides the much-needed middle ground between a qualitative process hazard analysis and a traditional, expensive quantitative risk analysis. Beginning with an identified accident scenario, LOPA...

Making EHS an Integral Part of Process Design

June, 2001
This book presents an approach—termed MERITT (Maximizing EHS Returns by Integrating Tools and Talents)—for enhancing process development through better integration of environmental, health, and safety evaluations. It draws upon critical components of inherent safety, pollution prevention, green...

Revalidating Process Hazard Analyses

February, 2001
The foundation of any successful process safety program is a current set of process hazard analyses (PHAs) for each of its processes. Revalidating PHAs to keep them up to date and applicable is a must. This book is derived from the experience of many companies in the chemical and hydrocarbon...

The Design and Evaluation of Physical Protection Systems

January, 2001
Guides the reader through the entire process of security system design and integration, illustrating how the various physical and electronic elements work together to form a comprehensive system. A great resource both for the security professional and student alike, the book is arranged in three...

Guidelines for Process Safety in Outsourced Manufacturing Operations

September, 2000
In today’s competitive economy, companies often augment in-house production by outsourcing chemical reaction processes and distillation, drying, formulating, blending, and packaging operations. While most of these tolling, or contracted manufacturing services, proceed without incident, recent major...

Guidelines for Chemical Process Quantitative Risk Analysis, 2nd Edition

October, 1999
Chemical process quantitative risk analysis (CPQRA) as applied to the CPI was first fully described in the first edition of this CCPS Guidelines book. This second edition is packed with information reflecting advances in this evolving methodology, and includes worked examples on a CD-ROM. CPQRA is...

Avoiding Static Ignition Hazards in Chemical Operations

September, 1999
Written by Laurence Britton, who has over 20 years' experience in the fields of static ignition and process fire and explosion hazards research, this resource addresses an area not extensively covered in process safety standards or literature: understanding and reducing potential hazards associated...

Guidelines for Process Safety in Batch Reaction Systems

September, 1999
Batch reaction systems pose unique challenges to process safety managers because they do not operate in a steady state. The sequence of processing steps, and frequent start-ups and shutdowns, increase the possibility of human errors and equipment failures. And, since batch plants are often designed...

Estimating the Flammable Mass of a Vapor Cloud

July, 1999
This CCPS Concept book shows designers and operators of chemical facilities how to realistically estimate the flammable mass in a cloud of accidentally released material that is capable of igniting. It provides information on industry experience with flammable vapor clouds, basic concepts of fires...

Guidelines for Design Solutions for Process Equipment Failures

August, 1998
While there is no "perfect" solution or absolute zero risk, engineering design can significantly reduce risk potential in the CPI. In Guidelines for Design Solutions to Process Equipment Failures, industry experts offer their broad experience in identifying numerous solutions to the more common...

Dow's Chemical Exposure Index Guide, 1st Edition

August, 1998
Dow Chemical developed the Chemical Exposure Index to help its engineers design and operate safer facilities. This seminal guide to rating the relative acute health hazard potential of a chemical release to workers and the neighboring community is available to the chemical process community. The...

Guidelines for Safe Warehousing of Chemicals

June, 1998
A comprehensive understanding of the potential dangers inherent in warehousing chemicals is the first step in managing the associated risks. Written by industry professionals for warehouse operators, designers, and all who are concerned with the safe warehousing of chemicals, this book offers a...

RELEASE: A Model with Data to Predict Aerosol Rainout in Accidental Releases

March, 1998
This book documents CCPS's Aerosol Research Program to develop a model to predict liquid rainout from release of a pressurized, liquefied gas--and, hence the residual amount of material in a vapor cloud, which may be greater than the amount calculated from an enthalpy chart. RELEASE predicts the...

Pages

Subscribe to Process Safety