Search form

Understand Hazard & Risk

The foundation of a risk-based approach which will allow an organization to use this information to allocate limited resources in the most effective manner.

Incident Investigation – Addressing the Worst That Could Have Happened

Mar 13, 2011
Samuel A. Rodgers
Incident Investigation techniques typically start with a detailed description of the actual consequence and work backward toward the root causes. A lot of time is spent to qualify and quantify the actual consequence so as to appropriately apply resources to prevent recurrence. A frequent outcome of...

Kinetic Modeling of the Reactions Involved in the T2 Explosion

Mar 13, 2011
Ronald J. Willey
The runaway reaction at the chemical preparation facility called T2 laboratories in Jacksonville, Florida on December 19, 2007 is analyzed. The approached involved estimating kinetic parameters based on temperature time traces presented in the CSB final report for ARSST (Advance Reactive System...

Gas Piping and Equipment Commissioning Risks "10 Key Things Everyone Should Know"

Mar 23, 2010
John R. Puskar
There have been a number of devastating incidents related to natural gas piping system and the start-up and commissioning of equipment. It's very rarely that an incident occurs when equipment is at the ready and in some normal operating routine. The vast majority of incidents are directly related...

Burn Injury Caused by Mixing Incompatible Chemicals with Sodium Permanganate

Mar 23, 2010
Russell A. Ogle
This paper discusses the investigation of an accident caused by the mixing of incompatible chemicals, a strong oxidizing agent with a reducing agent. The exact mixture and sequence of mixing was unknown, but the materials included an aqueous solution of 40% sodium permanganate (NaMnO4) and possibly...

Hazards of Unplanned Power Outages: Implementing Appropriate Safeguards

Mar 23, 2010
Russell A. Ogle
Accident root cause investigations often may identify unplanned power outages as the cause of a catastrophic accident. Unplanned power outages can be an initiating event that leads to an emergency shutdown of a process unit. If the emergency shutdown is managed incorrectly, it can result in an...

Evaluating Human Response to an Alarm for LOPA or Safety Studies

Mar 23, 2010
Robert J. Stack
Many LOPA scenarios have an independent protection layer (IPL) credit for operator intervention to prevent or mitigate the scenario. It is often difficult for the LOPA team or other safety teams to assess if the appropriate operator response credit is being taken. To allow a more consistent...

Modification of Risk Using Barrier Methodology

Mar 23, 2010
Robin Pitblado
Risk assessments use frequency data mostly from generic sources, typically from the North Sea offshore environment or from process facility records mainly from Europe. As QRA's are being applied increasingly in North America and in the developing world, novel techniques are necessary to establish...

Lessons Learned from Real World Application of the Bow-Tie Method

Mar 22, 2010
Steve Lewis
The benefits of using bow-tie diagrams for risk management have been realized by organizations world-wide. They provide a readily understandable visualization of the relationships between the causes of business upsets, the escalation of such event to a range of possible outcomes, the controls...

Materials as Inherent Ignition Sources for Dust Explosions During Spray Drying

Mar 22, 2010
Vincent Van den Hoogenband
During spray drying, a solution is dispersed through a nozzle in small droplets to evaporate the water by means of hot air. In a large number of these processes, organic materials are processed so three out of four factors for dust explosions to occur are already present. The only thing missing for...

Ensuring Consistency of Corporate Risk Criteria

Mar 22, 2010
J. Wayne Chastain
The recently published CCPS text Guidelines for Developing Quantitative Safety Risk Criteria makes a strong case for corporations developing risk criteria. One topic addressed in the text is the development of criteria for use in single cause – consequence risk analysis methodologies such as Layer...

Utilizing Integrated Risk Assessment to Maximize Asset Integrity Management

Mar 22, 2010
Steve Soos
The advent of various safety standards like ANSI /ISA 84, IEC 61511, API 14C, API 580 / 581, SAE JA1011, IEC 60330 and PSM guidelines has been a good impetus in improving the availability and reliability of safety systems and processes with an objective to meet the requirements defined by OSHA, EPA...

Practical Issues with Marginally Explosible Dusts - Evaluating the Real Hazard

Mar 22, 2010
Samuel A. Rodgers
A combustible dust can be non-explosible, marginally explosible or severely explosible. With the exception of a few standards with a quantitative perspective (such as NFPA 68), most safety standards and regulations do not differentiate marginally explosible dusts from severely explosible dusts. As...

Modeling Small Releases from Tanks

Mar 22, 2010
Fredrick H. Knack
The methodologies in the chapter on “Dispersion Modeling” in the CCPS book Guidelines for Consequence Analysis of Chemical Releases, provide means for modeling outdoors releases at relatively long distances from a large source. At times it is necessary to model releases at relatively short...

Pages

Subscribe to Understand Hazard & Risk