Training and Performance Assurance

Training workers and assuring their reliable performance of critical tasks is one of nine elements in the RBPS pillar of managing risk. In this chapter, the context of process safety management systems, the meaning of training, the attributes of a good training system, and the steps an organization might take to implement a robust training program are described. Introduction to Training and Performance Assurance.

For more in-depth information regarding managing risk, please see CCPS' Guidelines.

Implementation Issues with Regards to Process Safety Programs

Conference Presentation
Southwest Process Technology Conference
Thursday, October 9, 2014 - 1:30pm-2:00pm
The chemical industry continues to struggle and face challenges with regard to improvements in safety performance because of a lack of effective...

Risk Assessment Challenges 20:20

Conference Presentation
Southwest Process Technology Conference
Thursday, October 3, 2013 - 1:30pm-4:30pm
A wide variety of hazard identification and risk assessment techniques are available. All techniques require knowledge in the fundamentals of the...

Taking a Risk for Safety

Conference Presentation
Global Congress on Process Safety
Tuesday, April 3, 2012 - 12:00am
Taking a Risk for Safety Over the last twenty years companies in the process industries have invested heavily in their occupational safety programs...

A Pre-Plan for Process Safety Management

Conference Presentation
Global Congress on Process Safety
Tuesday, April 3, 2012 - 12:00am
This paper will present the steps a small pharmaceutical research and development company is taking to prepare for Process Safety Management (PSM)...

Process Safety Management Training for New Engineers

Conference Presentation
Global Congress on Process Safety
Tuesday, April 3, 2012 - 12:00am
Abstracts Project: PSM training for new Engineer Presenter: Name VIGNALE, Alberto Eduardo Telephone +54-3487-444372 e-mail alberto.e.vignale@monsanto...

Process Safety - Management or Leadership?

Conference Presentation
Global Congress on Process Safety
Tuesday, April 3, 2012 - 12:00am
Process Safety Management is often presented as technically complex, requiring a large staff of engineers and specialists with an array of tools and...

Operational Group for Process Safety

Conference Presentation
Global Congress on Process Safety
Tuesday, April 3, 2012 - 12:00am
With the increase in requirements for monitoring and improving process safety indicators on a thermoelectric unit linked to a Braskem Basic...

An Introduction to Assessing Process Hazards

Conference Presentation
Global Congress on Process Safety
Tuesday, April 3, 2012 - 12:00am
A surprising number of process incidents occur due to a lack of general understanding of process hazards and lack of basic hazards assessment,...

The CCPS Reactivity Evaluation Software Tool

Conference Presentation
Global Congress on Process Safety
Monday, April 2, 2012 - 12:00am
Incidents involving uncontrolled chemical reactions continue to result in injuries, fatalities and economic loss and harm in industry. These...

Leveraging PSM to Implement Key Elements of a SIS Program

Conference Presentation
Global Congress on Process Safety
Monday, April 2, 2012 - 12:00am
The International Electrotechnical Commission (IEC) 61511 standard, “Functional Safety – Safety Instrumented Systems for the Process Industry Sector...

ìWell the Team Has Met and Completed the PHAÖ.Now What?î

Conference Presentation
Global Congress on Process Safety
Monday, April 2, 2012 - 12:00am
Learning from the experiences and expertise of others has long been recognized as a valued process when completing PHAs. The gathering of a multi-...

Safety System Impairments and the Need to Manage Peak Risk

Conference Presentation
Global Congress on Process Safety
Monday, April 2, 2012 - 12:00am
The catastrophic incident which occurred at Bhopal is often referenced with respect to inherent safety issues. Did intermediate chemicals need to be...

Improving the Performance of Established PSM Programs

Conference Presentation
Global Congress on Process Safety
Monday, April 2, 2012 - 12:00am
Many facilities have now implemented and maintained PSM programs for 20 years or more, but these facilities continue to have sometimes serious...

Avoiding Common PHA Mistakes

Conference Presentation
Global Congress on Process Safety
Monday, April 2, 2012 - 12:00am
OSHA's National Emphasis Program (NEP) on refineries has concluded. The two most cited elements of the Process Safety Management standard (PSM - 1910...

Integrity Inspection of In-Plant Underground Piping

Conference Presentation
Global Congress on Process Safety
Monday, April 2, 2012 - 12:00am
Underground piping inside plant boundaries is frequently out-of-sight, out-of-mind. While there exists a wide body of knowledge, mature technology,...

Retired and Dangerous

Conference Presentation
Global Congress on Process Safety
Monday, April 2, 2012 - 12:00am
“Planning not to retire is simply not a viable retirement strategy.” — Catherine Collinson, Transamerica Center for Retirement Studies The Hazard...

Human Performance Training

Conference Presentation
Global Congress on Process Safety
Sunday, March 13, 2011 - 8:00pm
Operator competency has been a major challenge for the petrochemical and refining industry for decades. In recent times, human factors are believed...

Stability Analysis of Safety Valve

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Monday, March 22, 2010 - 8:00pm
The stability for a safety valve was investigated by experiments and analysis. It was found that the dynamic instability was caused by the...

Fundamentals of Fire and Fire Control

Archived Webinar
Sep 16, 2009
This webinar features a live question and answer session with Dr. J. Reed Welker, one of the world’s most respected experts in fire and fire control.

Explosion Prevention and Mitigation

Conference Presentation
Global Congress on Process Safety
Thursday, April 30, 2009 - 4:00am
The analysis, prevention, protection and mitigation of fire, explosion, and reactivity hazards continue to be important to the loss prevention...

LNG Safety - II

Conference Presentation
AIChE Spring Meeting and Global Congress on Process Safety
Wednesday, April 29, 2009 - 10:00am
This session presents advancements in LNG safety in LNG baseload and receiving terminals, LNG ships and other related areas. LNG Vapor Dispersion...

Fire, Explosion, & Quantitative Analysis

Conference Presentation
Global Congress on Process Safety
Tuesday, April 28, 2009 - 11:30am
Fires and explosions result in the largest losses in process safety accidents. The increased sensitivity by industry, regulatory, and public sectors...

Safety Culture and Operational Discipline

Conference Presentation
Global Congress on Process Safety
Monday, April 27, 2009 - 9:30am
This session focuses on the cultural aspects of a successful Process Safety program. Papers that are presented cover new and innovative ideas on...

Incidents That Define Process Safety

March, 2008
Incidents That Define Process Safety describes approximately fifty incidents that have had a significant impact on the chemical and refining industries' approaches to modern process safety. Events are described in detail so readers get a fundamental understanding of the root causes, the...

Managing Dust Explosion Hazards

August
2009
Safety
Vahid Ebadat
Companies that handle powders or other particulate solids need to be aware of the potential for fire and explosions, and follow industry best practices, codes and standards to manage the risk.
Subscribe to Training and Performance Assurance