Safe Work Practices

The RBPS element that helps control hazards associated with maintenance and other nonroutine work is one of nine elements in the RBPS pillar of managing risk. Introduction to Safe Work Practices and Control of Hazardous Energy By Lock-out and Tag-out, provide information on various safe work practices. The importance of communcation between production and maintenance employees ensures positive prevention of all hazardous energy sources causing harm to others. 

See all publications regarding safe work practice in these CCPS' Guidelines for Managing Risk.

On the Catastrophic Explosion of the AZF Plant in Toulouse (September 21, 2001)

Apr 4, 2012
Georges Guiochon
On the Catastrophic Explosion of the AZF plant in Toulouse (September 21, 2001) Georges Guiochon and Laurent Jacob Department of Chemistry, University of Tennessee, Knoxville, TN, 37996-1600, USA During the morning of September 21, 2001, a warehouse containing ca. 300 metric tons of production...

Explosions in Transformer and Circuit-Breaker Tanks Due to Arcing Events

Apr 4, 2012
Timothy L. Morse
Industrial transformers and circuit breakers operate with large voltage differences between current-carrying internal components and the grounded tank walls. A breakdown in the dielectric strength of the insulating oil in the tank due to contamination or other causes can lead to the formation of an...

Flash Fire From a Hot Combustible Liquid

Apr 4, 2012
Russell A. Ogle
A truck driver loading a tanker was fatally injured in a flash fire. The accident occurred at the loading rack of a petroleum refinery. The truck driver was on top of the tank trailer loading a liquid petroleum byproduct material similar to asphalt through an open hatch on the trailer. The material...

Dust Explosions: Case Study of Dryer Explosions and Poor Explosion Vent Design

Apr 4, 2012
Scott G. Davis
Four recent explosions occurred in a single burner, recirculating solids ring dryer. The dryer was equipped with a recirculating fan, a burner section, a section to introduce the solids, a ring duct, a pre-separator and four cyclones. Seven explosion doors were also used to protect the integrity of...

Identification of Process Hazards in Laboratories and Pilot Plants

Apr 3, 2012
Christine Browning
The focus of most laboratory experiments and piloting operations is the development of a new, innovative chemical process or the improvement of an existing chemical process. These activities are designed to, and focus on, evaluation of the intended chemistry for the process being studied. The...

The Structured What If/Checklist A New Twist On An Old Approach

Apr 3, 2012
C. Curtis Clements
The purpose of Process Hazards Analysis (PHA) is to identify and understand the hazards associated with the process being reviewed, to understand the potential resultant hazardous events, and to prevent those events by identifying all the potential routes to those events and ensuring that adequate...

Operational Group for Process Safety

Apr 3, 2012
Maria Clara Saraiva
With the increase in requirements for monitoring and improving process safety indicators on a thermoelectric unit linked to a Braskem Basic Petrochemical Site in Brazil, a large range of knowledge among engineers and operators were found. The theme Process Safety was commonly confused with...

Taking a Risk for Safety

Apr 3, 2012
Ian Sutton
Taking a Risk for Safety Over the last twenty years companies in the process industries have invested heavily in their occupational safety programs. These investments of time and money have been made in many areas, including training, behavior-based safety and the use of PPE. The results have been...

PSM ? Process Safety Leadership: Practical Actions That Set PS Leadership Apart

Apr 3, 2012
Dawn Wurst
PSM ≠ Process Safety Leadership : Practical actions that set PS Leadership apart It is well known in business improvement circles that good management does not necessarily equal good leadership. This applies to PSM as well. Effectively leading the translation of PSM to action for all whom it...

Auto Refrigeration and Metal Embrittlement

Apr 3, 2012
Tys Koerts
Abstract AIChE Housten Conference April 1-4 2012 Loss Of Containment Protection Auto Refrigeration and Metal Embrittlement Tys Koerts Sr. Process Safety Consultant Auto-refrigeration occurs on adiabatic expansion of gasses and boiling of liquids. The resulting low temperature can bring metals like...

Pages

Subscribe to Safe Work Practices