Search form

Workforce Involvement

Promoting the active involvement of personnel at all levels of the organization is one of the five elements in the  RBPS pillar of committing to process safety.  Resources in this section addresses the diversity of roles that workers can fulfill in support of process safety management system development, implementation, and enhancement. Start by reading an Introduction to Workforce Involvement and then explore the resources below.

Fatal Exposure: Tragedy At DuPont

Apr 4, 2012
Marc G. Sáenz
This investigation by the United States Chemical Safety and Hazard Investigation Board (CSB) provides unique lessons in process safety. Three incidents occurred over a 33-hour period at the DuPont plant in Belle, WV. The most serious incident occurred on January 23, 2010, when a release of highly...

Explosions in Transformer and Circuit-Breaker Tanks Due to Arcing Events

Apr 4, 2012
Timothy L. Morse
Industrial transformers and circuit breakers operate with large voltage differences between current-carrying internal components and the grounded tank walls. A breakdown in the dielectric strength of the insulating oil in the tank due to contamination or other causes can lead to the formation of an...

On the Catastrophic Explosion of the AZF Plant in Toulouse (September 21, 2001)

Apr 4, 2012
Georges Guiochon
On the Catastrophic Explosion of the AZF plant in Toulouse (September 21, 2001) Georges Guiochon and Laurent Jacob Department of Chemistry, University of Tennessee, Knoxville, TN, 37996-1600, USA During the morning of September 21, 2001, a warehouse containing ca. 300 metric tons of production...

Impact of Guidelines for Independent Protection Layers and Initiating Events

Apr 4, 2012
J. Wayne Chastain
Layers of Protection Analysis (LOPA) was introduced about 15 years ago as a simplified risk assessment method between HAZOP (Process Hazard Analysis [PHA]) and quantitative risk assessment (QRA). This introduction was timely; LOPA was quickly adopted world-wide. The rules for independent protection...

Auto Refrigeration and Metal Embrittlement

Apr 3, 2012
Tys Koerts
Abstract AIChE Housten Conference April 1-4 2012 Loss Of Containment Protection Auto Refrigeration and Metal Embrittlement Tys Koerts Sr. Process Safety Consultant Auto-refrigeration occurs on adiabatic expansion of gasses and boiling of liquids. The resulting low temperature can bring metals like...

ìBridging SEMS Between the Owner, Operator, and Contractorî

Apr 3, 2012
Ester Brawley
As of November 2011, offshore platforms have been required to develop and implement a Safety and Environmental Management (SEMS) Program. The offshore industry has many unique challenges that their onshore counterparts have not had to face. One of the biggest challenges facing the offshore industry...

Process Safety - Management or Leadership?

Apr 3, 2012
Charles J. King
Process Safety Management is often presented as technically complex, requiring a large staff of engineers and specialists with an array of tools and techniques that appear to grow in intricacy and sophistication year by year. Large companies are generally well positioned to operate in this arena –...

Case Histories and Technology Innovations for StorageTank Loss Prevention

Apr 3, 2012
Szu-ying Huang
Storage tanks are most common material containing units in process industries. There have been many accidents associated within storage tank (material deficiency, structure design failures, operation error etc.) or among storage areas throughout the history. For example, overfilling has already...

Operational Group for Process Safety

Apr 3, 2012
Maria Clara Saraiva
With the increase in requirements for monitoring and improving process safety indicators on a thermoelectric unit linked to a Braskem Basic Petrochemical Site in Brazil, a large range of knowledge among engineers and operators were found. The theme Process Safety was commonly confused with...

Pages

Subscribe to Workforce Involvement