Control Co.

Traceable pH standards
The new Traceable pH standards are certified reference materials (CRMs) with an accuracy of ±0.010 pH at 25°C that are 100% compatible with all instruments and probes. CRMs meet federal, state, and local agencies’ strict mandates and provide exact calibration results for any pH meter. All CRMs feature resistance to temperature changes and long-term buffer stability. Each 100-mL Traceable container is supplied with an individual temperature-compensation chart, as well as a serial-numbered certificate that indicates traceability to the National Institute of Standards and Technology’s (NIST) and/or another national standards laboratory’s standards.

Traceable device
The Traceable device is a combination hydrometer, thermometer, barometer and dewpoint pen. It has a relative humidity range of 10.0–95.0% RH with a resolution of 0.1% and an accuracy of ±3–4%. The temperature range is 32.0°F to 122.0°F (0.0–50.0°C) with a resolution of 0.1% and an accuracy of ±1%. The dewpoint range is 13.5°F to 120.1°F (–25.3°C to 48.9°C) with a resolution of 0.01°.The barometer measures pressure in three different units: inches of mercury, millibars, and millimeters of mercury. The user-selectable dual display can show the following combinations of readings: humidity and temperature, humidity and dewpoint, barometric pressure and temperature, or barometric pressure and humidity.

Traceable wide-range thermometer
The Traceable wide-range thermometer is suitable for measuring temperatures from –328°F to 2,498°F (–200°C to 1,370°C). Its stainless steel Type K thermocouple probe can be used with liquids, gases, or semisolids. Its backlit 0.5-in.-high liquid crystal display (LCD) is easy to read, even in poor lighting conditions. It features an instant recall of minimum and maximum readings. Data collected by the thermometer may be output to a computer or data logger for capturing and storing readings.

Traceable Dissolved Oxygen Pen
The Traceable dissolved oxygen pen withstands severe lab and harsh plant environments and has a long service life. It has a water-resistant acrylonitrile-butadiene-styrene (ABS) plastic housing with an O-ring seal and membrane keypad. The pen’s high-contrast, easy-to-read liquid crystal display has a luminescent backlight that can be read in total darkness and uses 0.375-in-high digits to simultaneously display both oxygen concentration and temperature. The unit recalls minimum and maximum readings at the press of a button. The pen measures 1.5-in. dia. by 8-in. long, and weighs 5 oz.

Traceable Refrigerator/Freezer Plus thermometer
The Traceable Refrigerator/Freezer Plus thermometer is protected by a bottle to insulate the sensor from rapid temperature changes, such as the opening of a refrigerator door. The bottle measures 1.0 in. by 2.5 in., and is filled with nontoxic glycol. The sensor accurately monitors temperatures in freezers, water baths, heating blocks, incubators and refrigerators. It fulfills all U.S. Centers for Disease Control (CDC) thermometer and vaccine temperature requirements. It features a triple display that simultaneously shows high, low and current temperatures, as well as minimum/maximum monitors that track high/low readings for any user-defined time period. The thermometer operates over the range of –58ºF to 158ºF (–50º to 70ºC) with a resolution of 0.1º and accuracy of ±0.5ºC, and its alarm is programmable in 1º increments.

Traceable infrared thermometer
The Traceable infrared thermometer can take readings on any surface, including solids, semi-solids, and liquids. Its non-invasive, non-contact measurements make it suitable for food preparation, life science, pharmaceutical, petroleum, clean room, electronics, and field applications. Each unit has an individually serial-numbered Traceable certificate indicating ISO 17025 accreditation and compliance with National Institute of Standards and Technology (NIST) traceability standards. The thermometer’s range is –27ºF to 428ºF (–33ºC to 220ºC), with a resolution of 0.1º and an accuracy of ±1ºC+2%. Its dimensions are 3.25 in. by 0.75 in., and it weighs 0.75 oz. It can pause the display at a current reading, and has a 1:1 field of view. Its fixed emissivity of 0.95 covers 90% of all applications. The thermometer comes with a pocket clip, keychain, and lanyard, and batteries are included.

Traceable Lab Controller
The Traceable Lab Controller controls any appliance plugged into the back of it. In the time-of-day mode, it can be programmed for up to 224 on/off switchings per day. In the countdown mode, it turns on/off to the second. In the repeat mode, it continually cycles equipment on/off at any two unique time intervals. Three independent timing channels can be used to count down and alarm, count up (stopwatch mode), or count down repeat (repetitively alarm at a specific time interval). The Traceable accommodates times from 1 s to 100 h. Each controller comes with a serial-numbered Traceable certificate from the company’s ISO 17025 calibration laboratory accredited by A2LA, indicating traceability to National Institute of Standards and Technology standards.