What's New
Use this Spectrophotometer for Professional Color Measurements
The UltraScan PRO measures both reflected and transmitted color and meets CIE, ASTM and USP guidelines for accurate color measurement. The instrument scans from 350 nm to 1,050 nm in seconds and its 5-nm optical resolution enables precise measurement of colors with sharp cutoff characteristics. The D65 illumination source is calibrated in the ultraviolet region for the accurate measurement of whitening agents. In addition to color and spectral data, metrics such as APHA (Hazen), Saybolt, Gardner Scale, ASTM D 1500, Yellowness Index, Whiteness Index and Transmission Haze can be quantified. UltraScan PRO uses diffuse 8-deg geometry with automated specular component inclusion/exclusion. It also features three sizes of sample measurement areas with automated lens changing, and it includes EasyMatch QC software. Designed to be a reference instrument, it is ideal for research and quality control applications in both laboratory and production environments.
Appeared In Issue: January 2007
HunterLab
www.hunterlab.com
Accurately Measure Moisture In Natural Gas with This Analyzer
The Model 5100-NCM offers a highly reliable and cost-effective method for quickly and accurately measuring moisture in natural gas. The device has a detection limit of 5 ppmv and an operating range from 5 to 2,500 ppmv. It is accurate to less than 2% of reading or ±4 ppmv, whichever is greater. The laser-based analyzer features compact, fully enclosed optics and sample conditioning, on-board moisture verification, and all digital processing. The rugged, compact unit is available in an IP65 and NEMA 4 enclosure with both Modbus and Ethernet analog and digital connectivity.
Appeared In Issue: January 2007
AMETEK Process Instruments
www.ametekpi.com
This Analyzer Checks the Sulfur Specification in Diesel Fuel
In only eight minutes, the AC Sulfur SIMDIS analyzer reports the sulfur boiling-point distribution of petroleum products having a final boiling point of 450°C (850 °F) or lower at atmospheric pressure. The device is based on the Agilent Technologies 6890 Series GC with electronic pneumatics control configured with: accelerated SIMDIS ASTM D 2887 application; flame ionization detector (FID); and automatic liquid injector. To determine the sulfur components present in the sample, the analyzer uses a sulfur chemiluminescence detector (SCD), which offers excellent sensitivity. The SCD enables the analyzer to detect sulfur concentrations below 50 ppm in diesel samples and possibly down to 10 ppm depending on the distribution of the sulfur components in the sample.
Appeared In Issue: January 2007
AC Analytical Controls BV
www.analytical-controls.com
This Mass Flowmeter and Controller Asks “How Low Do You Need to Flow?”
With state-of-the-art sensor technology and highly engineered direct-acting valve design, the Micro-Trak 101 Series high-performance digital mass flowmeter accurately measures and controls mass flows of gas previously thought by scientists to be too low for a reliable reading. The flowmeter is specifically designed for flow ranges under 4 cm3/min with a minimum controllable mass flowrate of 0.1 cm3/min. Excellent accuracy (±1.0% of full scale) and repeatability (±0.2%) coupled with unsurpassed instrument stability offer users an instrument they can consistently depend on. Micro-Trak’s all-stainless-steel flow path (with elastomer seals to eliminate leaks) is suitable for most clean gases, including corrosives and toxics. The small footprint (3.0 in. × 1.0 in.), 24-VDC power and choice of multiple communications make installation easy.
Appeared In Issue: January 2007
Sierra Instruments Inc.
www.sierrainstruments.com
Multivariable Vortex Flowmeter Reduces Process Variability and Total Installed Cost
The Rosemount MultiVariable 8800 vortex flowmeter combines this firm’s proven vortex technology with a temperature-compensated mass flow output directly from the meter to reduce process variability. Unlike traditional designs that integrate the vortex and temperature sensor into the same assembly, this flowmeter has isolated, independent vortex and temperature sensors, allowing both sensors to be verified or replaced independently without breaking the process seals. This eliminates process shutdown for verification of the temperature sensor. The 8800 vortex flowmeter lowers total installed cost of temperature-compensated measurement points by 25% compared to external compensation of a traditional vortex. Cost is reduced by eliminating the need for an external thermowell, temperature sensor and transmitter, and a flow computer or control system compensation program. The unit is commonly used in temperature-compensated saturated-steam applications.
Appeared In Issue: January 2007
Emerson Process Management, Rosemount Div.
www.emersonprocess.com
Portable Solids-Liquid-Injection-Manifold Effectively Handles Difficult-to-Wet Solids
Designed for the induction of difficult-to-wet solids, such as fumed silica, calcium carbonate, titanium dioxide, gums, thickeners and many pigments, the solids-liquid-injection-manifold (SLIM) system takes advantage of the strong vacuum force that occurs at the intake area and sucks in powders or liquids for immediate emulsification or dispersion. This new model includes all-stainless-steel surfaces and a mirror finish on the interior wetted components. As a result of this clean design, the unit is CIP/SIP-capable. The entire system is mounted on casters to enable portability and includes a 1-3/4-gal funnel for powder charging. Complete controls, sanitary connections, a double mechanical seal and seal barrier system are also provided.
Appeared In Issue: January 2007
Charles Ross and Son Co.
www.rossmixers.com
Cost-Effective Bag Filter is Ideal for High-Flowrate Applications
The Maxiline MBF HD multi-bag filter housing is designed for cost-sensitive, high-flowrate liquid filtration applications up to 4,500 gal/min. The unit features a rugged, hand-wheel-operated davit cover that provides dependable service in most demanding industrial applications. Filter media changeout is simple — remove the cover, loosen the cover eye bolts, turn the hand wheel to raise the cover, and swing it aside; no overhead cranes or external lifting gear are required. The filter housing has unique 3-point filter-bag hold-downs or bayonet fittings to ensure that the seal between each filter bag and housing body protects against process media bypass. Every unit comes with an ASME “U” Code Stamp and has a side-entry design with a low-profile tangential outlet to simplify filter bag removal and installation. The filter housings offer standard electropolished perforated-filter-bag restrainer baskets and a bead-blasted exterior finish. They are available in Type 304 stainless steel or carbon steel in 3- to 24-filter-bag designs.
Appeared In Issue: January 2007
Eaton Filtration LLC
www.filtration.eaton.com
Disposable Funnels Virtually Eliminate Spills on Floors and Equipment
The Industrial Fast Funnels are a simple, convenient and clean way to pour solids or liquids. Intended for one-time use, each funnel remains clean and compact until separated from the header and opened. Made from coated, heavy-grade paper stock, they can be used with virtually any liquid or powder and are designed to fit a wide variety of orifices as small as 3/4-in. dia. Since a new funnel is always ready for use, particle contamination and fluid cross-contamination are virtually eliminated
Appeared In Issue: January 2007
Trico
www.tricocorp.com
Proprietary Manufacturing Process Enables Pump to Handle Thin, Water-Like Liquids
Designed for highly viscous, abrasive or corrosive applications, the Moyno PowerFlow pump outperforms alternative positive-displacement pumps when handling adhesives and sealants, paints and coatings, paper starch, asphalts, polymers, resins, plastics, food products, pharmaceuticals, petroleum, and chemical and industrial waste. The pump delivers superior pumping performance, lower maintenance and longer life as a result of its hardened tool steel or hardened 17-4 PH stainless steel pumping elements. The firm’s new, proprietary manufacturing process capabilities ensure higher stator profile tolerances that enable the pump to effectively handle thin, water-like liquids, as well as fluids at temperatures up to 500°F. The pump can achieve high differential pressures up to 1,500 psi and flowrates up to 400 gal/min.
Appeared In Issue: January 2007
Moyno, Inc.
www.moyno.com
Modular Control Valve Can Satisfy A Multitude of Industrial Requirements
With its fully modular design, the two-port Spira-Trol control valve uses a low number of components to create a highly flexible and maintainable system where one valve can satisfy the needs of numerous industrial requirements. Both ANSI and EN versions share the same internals, and only three pneumatic actuators are required for valves up to 4-in. in size. The valve incorporates self-aligning and clamp-in-place internals for ease of maintenance. Its hard trim materials and modular design diffuse the discharge from plug and seat, as well as reduces internal flow velocities to minimize internal erosion. Standard offerings include: cast iron, SG iron, carbon steel, stainless steel or NACE construction; equal percentage, linear or fast-opening flow characteristic; 1/2- to 4-in. sizes; and ANSI, PN, JIS, KS, NPT, BSP or SW connections.
Appeared In Issue: January 2007
Spirax Sarco, Inc.
http://www.spiraxsarco.com/us/
Continuously Monitor Flame Quality and Impingement in Process Heaters
The FireSight high-temperature remote viewing system permits continuous and safe viewing of the flame quality and impingement on the tube walls of petrochemical process heaters. The system allows operators to view the flame in real time in order to tune the furnace to eliminate impingement, a hazardous and potentially catastrophic condition. It also provides an economical means to speed light-off and reduce NOx emissions by permitting color video monitoring of combustion and process control in boilers, furnaces, kilns and incinerators. The FireSight system is capable of operating at temperatures up to 3,000°F (air-cooled model) or 4,250°F (water-cooled).
Appeared In Issue: January 2007
Lenox Instrument
www.lenoxinst.com
Porous Material is Anti-Adhesive And Chemically Resistant
New to this firm’s line of PTFE compounded materials is Rulon P30, developed for highly technical applications that require porosity, superior anti-adhesion and universal chemical resistance. The purity of this material ensures that no fluid it comes in contact with will become contaminated and its hydrophobic manner prevents water absorption. With a working temperature range from –320°F to 500°F, Rulon P30 is available in rods, tubes or sheets, as well as custom-fabricated finished parts. It is ideal for gas permeation, measuring devices, pH sensors, control systems, fluid management and spectrophotometer applications.
Appeared In Issue: January 2007
Saint-Gobain Performance Plastics
www.rulon-meldin.com
Coatings and Polymers Can Now be Used in Food Applications
Based on Victrex PEEK polymer, a linear, aromatic, semi-crystalline material, Vicote coatings and Victrex PEEK HT grades are now FDA-compliant and can be used in food processing and related applications to make components that will come into contact with food. Vicote 708 and 709 are available in 10-mm and 50-mm particle sizes, and address the specific requirements of demanding high-temperature applications. They also offer excellent wear and scratch resistance. Victrex PEEK HT has a higher glass-transition temperature and melt temperature than Victrex PEEK, delivering longer-term durability, strength and reliability.
Appeared In Issue: January 2007
Victrex USA Inc.
www.victrex.com
Power Conditioner Provides Power For Foundation Fieldbus H1 Networks
For use with Foundation Fieldbus H1 networks in general purpose and non-incendive applications, the FPS200 TrunkGuard Fieldbus power conditioner is available in both simplex (non-redundant) and duplex (redundant) models. The simplex configuration allows up to eight FPS200 power conditioner modules to be installed on a single DIN-rail carrier to provide power to up to eight individual H1 fieldbus segments. Each plug-in module provides 350 mA at 26 V of isolated, conditioned power, fully compliant with the FF831-1 fieldbus specification. The duplex configuration provides redundant, load-sharing, hot-swappable power conditioners. During normal operation, two modules share the supply load to one H1 segment. If one module fails, the other module seamlessly picks up the entire load. Individual power conditioners can be hot-swapped. An FPS200 TrunkGuard Fieldbus Duplex power carrier with eight power conditioners can support four H1 segments. On-board segment diagnostics include an LED that indicates segment short circuit, low voltage output to the segment, and low supply voltage to the carrier board. Also included is a volt-free contact closure output that can be wired to the host system for alarm notification.
Appeared In Issue: January 2007
MooreHawke, a Div. of Moore Industries International
www.miinet.com
Compact Short-Stroke Thruster Can Handle Frequent Stops
The P5T2 series thruster features short-stroke, heavy-duty performance in a smaller footprint than conventional thrusters that use external cylinders. It is ideal for handling frequent stops on conveyor equipment, tamping and pressing on packaging machinery, as well as the unloading/loading and clamping processes on assembly machinery. Available in 12-, 16-, 20-, 25-, 32-, 40-, 50-, 63-, 80-, and 100-mm bore sizes with strokes up to 200 mm, the P5T2 series can operate at pressures up to 1 MPa. Standard features include through-hole mounting and top porting. The thruster series has: aluminum body and end caps; steel tool plate, support rods, and rod bolts; and a stainless steel piston rod. Standard nitrile seals operate at temperatures between –18°C and 74°C. A PTFE impregnated composite bushing provides high-load carrying capabilities with excellent resistance to shock loading.
Appeared In Issue: January 2007
Parker Hannifin Corp., Actuator Div.
www.parker.com/actuator/