Product Digest - Piping and Tubing
Plastic piping is big, long and tough — and available in a complete range of sizes
By expanding its Schedule 80 polyvinyl chloride (PVC) and chlorinated polyvinyl chloride (CPVC) piping systems to include molded caps in 10- and 12-in. sizes, this company now offers a comprehensive range of piping in sizes from 1/4 in. to 16 in. The product line features molded Flush Style Reducer Bushings through 12 in., as well as fabricated fittings through 16-in. Corrosion resistant, lightweight, and able to withstand temperatures up to 140ºF and 210ºF (PVC and CPVC, respectively), these molded products are more cost-effective than machined parts, thereby lowering overall installation costs.
Appeared In Issue: November 2006
GF Piping Systems
www.us.piping.georgefischer.com
A quick-connect system is quicker without O-rings
The Sentry QCIII quick-connect system uses Flaretek sealing technology on the chemical dispensing port, thereby eliminating the need for O-rings and associated maintenance. Liquid recirculation and dispensing is acheived through the same connection, significantly reducing cost of ownership. SentryQCIII is said to increase the flowrate by 150% compared to the maker’s existing quick connect systems.
Appeared In Issue: November 2006
Entegris
www.entegris.com
Get a clear view of what’s inside this tubing
Clear-40 is the brandname of a rigid PVC pipe made to Schedule 40 dimensions that allows users to see the contents. The pipe combines the corrosion and chemical resistance, and clarity of PVC with the advantage of a rigid tube that does not need ties or clamps to hold it upright or level. Clear-40 may be used interchangeably with Schedule 40 fittings of gray or white color. All ingredients are non-toxic and conform to FDA standards for use with food-contact surfaces. Stocked sizes range from 1/4 to 4 in. Custom options include bell-shaped ends and Schedule 80 dimensions.
Appeared In Issue: November 2006
New Age Industries, Inc.
www.newageindustries.com
When a longer pipe is better than two shorter pieces
Pipes in 40-ft sections are especially useful for transfer lines and other long, straight runs. They come in swaged polytetrafluoroethylene- (PTFE), polypropylene- (PP) and polyvinylidene fluoride- (PVDF) lined pipe in 1.5- to 6-in. sizes, and in perfluoroalkoxy- (PFA)lined pipe in 1.5- to 2-in. sizes. Plastic-lined pipe that is loose-lined or reverse-swaged — where the liner is compressed then inserted into a steel shell, where it expands —has been limited in length to 20 ft. Longer sections are fabricated by compressing the steel shell down on the liner during the picking and swaging process. This locks the liner in place to inhibit differential movement during temperature cycling.
Appeared In Issue: November 2006
Resistoflex Div., Crane Co.
www.resistoflex.com
These tube and adapter fittings cater to medium-pressure applications
Medium-pressure tubing and adapter fittings are available in a variety of styles to provide a leak-tight gas seal and vibration resistance in applications up to 15,000 psig (1,034 bar). Available in 1/4-, 3/8-, and 1/2-in. sizes, these Type 316 stainless steel fittings can be installed without any special tools. Fitting the assembly requires only a single turn or torque, and can be manual or automated; preassembled disposable cartridges ensure correct ferrule orientation.
Appeared In Issue: November 2006
Swagelok Co.
http://www.swagelok.com
Hose assemblies have the flexibility to bend and the strength to resist kinking
PAGE-flex SBF is an advanced design of Smoothbore PFA hose that utilizes a bonded, wire-braided, silicone-textile braided composite of Smoothbore polyfluoro alkyl (PFA) resin. giving this product superior flexibility (half the minimum bed radius of other smoothbore products), as well as superior kink and vacuum resistance. Operating temperatures range from –65°F to +325°F. The outer surface temperature of the tubes is cooler than what is seen competing systems offer, This reduces the potential for operator burns and environmental heat in confined spaces.
Appeared In Issue: November 2006
Parker/Page International Hose, Inc.
www.pageintl.com
Heat transfer is a hot market for stainless steel tubing
This fabricator of feedwater heater tubes for heat exchangers offers welded and cold-drawn, or welded and bead-conditioned austenitic stainless-steel tubing. Each tube meets customer-specified quality and performance standards. Welded and drawn tubing products are available in wide range of custom sizes and chemistries.
Appeared In Issue: November 2006
Plymouth Tube Co.
www.plymouth.com