Product Digest - Measurement Equipment
Precision Thermometer Offers Handheld Convenience
The handheld ASL F100 boasts an accuracy (±0.02°C) and resolution (0.001°C) comparable to what is normally associated with a bench-topthermometer. Two inputs allow direct temperature display from Pt100 or thermistor probes, or the ability to display the temperature difference between them. Measurements can be logged directly to memory to a PC via a USB port; a stastical analysis of measurements, including average, minimum/maximum, and standard deviation, can also be displayed. Depending on the thermometer probe used, the F100’s range is –200°C to 850°C.
Appeared In Issue: January 2006
Isotech North American
www.isotechna.com
Infrared Thermometer Reads Temperature Two Ways
Non-contact hot and cold surface temperature measurements of a pinpointed target area, or direct-contact measurements using any K-type thermocouple probe having a mini-style plug give the DT1000 dual-temperature infrared thermometer its versatility. It has a broad temperature range of –60°C to 500°C (–76°F to 932°F), and an accuracy of ±2% of reading or ±2°C. For infrared measurements, a bright “laser dot” sighting system helps pinpoint the center of the exact area to be measured — a 2-in. circle can be measured from a distance of 22 in.
Appeared In Issue: January 2006
Telatemp Corp.
www.telatemp.com
Pressure Gage is Designed to be Versatile
The digital MERIGAUGE provides local indication, signal transmission, or control for positive pressure or vacuum measurements. Pressure ranges are available to 6,000 psig at standard accuraccy of ±0.25% of full scale and optional accuracy of ±0.10% of full scale. A compound range of vacuum —14.7 to 0 to +50 psig is also available. Each gage can display in any of 12 field-selectable engineering units, including psig, ft or in. of water, in. or mm of mercury, bar, kPa, and user-configurable units. Options include panel mounting, 24-Vdc or battery-powered units, 4–20-mA output, adjustable SPDT relay outputs, and various style diaphragm seals.
Appeared In Issue: January 2006
Meriam Process Technologies
www.meriam.com
Portable Instrument Continuously Measures Up to Five Gases
The X-am 7000 can be fitted with three electrochemical and two infrared optical or catalytic sensors, and can simultaneously measure up to five gases. A choice of over 25 sensors allows the detection of more than 100 gases and vapors. The instrument is dust- and splash-proof, as well as water-resistant with a water-ingress-protection rating of IP67. A high-delivery pump can draw in sample gas through a hose up to 150 ft (45 m) long. When the instrument is in leak-detection mode, it displays a ppm bar graph on the display and emits an ascending or descending tone similar to a Geiger to reflect the detected gas concentration.
Appeared In Issue: January 2006
Draeger Safety Inc.
www.draeger-safety.com
Coriolis Meter Measures High Mass Flowrates
Designed for applications requiring the most accurate measurement of large quantities — up to 80,806 lb/min — the PROline Promass F Coriolis mass flowmeter offers accurate and repeatable measurement (±0.1% of range). The dual-tube sensor’s fully welded design eliminates internal gaskets and reduces the possibility of leakage. Secondary containment is standard and provides another line of defense. The 10-in. sensor weighs only 880 lb and measures 72.3 in. long or less (150 lb flange). The measuring tube is contructed of Type 316L stainless steel and has the required hazardous area approvals.
Appeared In Issue: January 2006
Endress+Hauser Inc.
www.us.endress.com/flow
Meter Provides Remote Digital Readout for Flowmeters
Flowrate or temperature readings from the firm’s ST and GF series thermal-dispersion mass flowmeters can be displayed remotely on the DM10, a loop-powered readout meter that can be inserted anywhere in the flowmeter’s 4–20-mA output loop. Measuring 3.15 in. high by 5.51 in. wide by 2.56 in. deep, the DM10 is scalable to ±1,999 digits and features oversized 1-in.-high characters for easy viewing.
Appeared In Issue: January 2006
Fluid Components International
www.fluidcomponents.com
pH Sensor Resists Oxidants and Organic Solvents
The Model 398 TUpH sensor features a helical reference pathway manufactured entirely from polyetheretherketone (PEEK) plastic. This material resists chemical attack, and the design protects the reference element by requiring contaminants to traverse a long, tortuous pathway before coming into contact with the internal reference electrode. A patented SILCORE triple-seal contaminant barrier further protects the integrity of the pH measurement, as does the unit’s titanium and Tefzel construction.
Appeared In Issue: January 2006
Rosemount Analytical, A division of Emerson Process Management
www.emersonprocess.com/rosemount